Quick Answer

How many leaf springs does a Chevy 3500 have?

Chevy GMC – 3500/3500HD Pickup Truck – Leaf Spring (Rear, 9 Leaves, Heavy Duty) Leaf Springs ship directly from our warehouses in NJ and TX.

Can you put 3500 leaf springs on a 2500?

Registered. As far as I know the only difference between 2500 and 3500s is the helper springs on the rear leafs. These do not touch until there is quite a bit of weight on the back. There is no difference in ride height.

Does adding more leaf springs increase payload?

If your truck works as hard as you do, every day, adding a leaf to your existing spring pack is a great way to increase your load and hauling capacity. Adding a leaf can give the average pickup an extra 700+ pounds in carrying capacity. Adding a leaf to your springs will raise your truck between .

How much weight can leaf springs hold?

There is usually two capacities listed on a leaf spring. The spring capacity and the axle capacity. For the 4-Leaf Double-Eye Spring # SP-212275 that you referenced it has a spring capacity of 1,750 lbs meaning that the individual spring can handle 1,750 lbs.

How many leaf springs does a Chevy 1500 have?

Chevy GMC – 1500/2500/3500 – Leaf Spring (Rear, 8 Leaves, Heavy Duty) – Beattie Spring.

How many leaf springs does a Chevy 2500 have?

Next up, the leaf springs. A 2500HD has five leaf springs, four mains and one overload positioned under the mains with no bump stops.

How do you strengthen leaf springs?

By adding an additional long, full-size leaf to the existing leaf stack or by adding an extra leaf to each rear leaf spring, you can increase the load capacity and raise the height of the vehicle up to a few inches.

How much does it cost to add a leaf spring to your truck?

The average cost for leaf spring replacement is between $655 and $743. Labor costs are estimated between $163 and $206 while parts are priced between $492 and $536. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

Are add a Leafs worth it?

Adding an add-a-leaf buys you just a bit of extra time before you need to replace them. As far as ride quality goes, I would say that doing the add-a-leaf makes the truck feel smoother, even though people say that it makes the suspension stiffer.

How do I know if my leaf springs are overloaded?

If a truck gets overloaded beyond its capacity, the leaf spring will flatten out, reducing the height of the truck….Other tell-tale signs of worn-out leaf springs include:

  1. Uneven tire wear.
  2. Frequent bottoming out.
  3. A bumpier, less comfortable ride.
  4. Leaning to one side.

Should leaf springs be lubricated?

Modern leaf springs do not need lubricating with oil — which may damage any anti-friction material between leaves. Spray them instead with a silicone-based lubricant. With most modern cars, leaf springs are found mainly in the rear suspension. Raise the end of the car to clean them.

How do overload springs work?

As the rear begins to sag it forces the lower overload leaf spring to come into contact with the other leaf springs above it. Once the truck sags enough, most often several inches, the overload leaf springs begin to touch, and this begins to put the muscle into action.

What is a add a leaf kit?

The Add-a-Leaf kit is a more affordable way to add more support to your existing leaf spring suspension system. This kit allows you to avoid paying for the cost and labor to install brand new leaf springs. It is designed to increase the capacity of your truck, trailer, SUV, trailer, and recreational vehicle.

How long are Chevy leaf springs?

32″

OEM Number(s) 15033928
Width 2 1/2″
(A) Short End Length 32″
(B) Long End Length 32″
(A) Short End Bushing RB-250

Is it OK to paint leaf springs?

Painting leaf springs is okay, lubing is not. Leaf springs have a damping factor as a result of the friction between the leaves, that’s one reason there are no shocks in the rear on the deuce. Fewer leaves means less damping and shocks need to be added.

How do you lubricate a leaf spring?

How To Lubricate Leaf Springs in 2 Minutes

How are leaf springs supposed to look?

How Should Leaf Springs Look? Leaf springs can be found on the front or rear end attached to either the bottom or top of the axle of cars, trucks, vans and SUVs. It looks like different sizes of bowed, narrow strips of steel stacked together. This part is created to absorb the gravity of an excessive amount of weight.

Should you replace leaf springs in pairs?

Stabilizer links are replaceable as a single part and generally do not require being replaced in pairs. Leaf springs may need to be replaced in pairs if: a match to the undamaged leaf spring cannot be identified or obtained. the undamaged leaf spring appears to be aged or worn.”

How much does it cost to get leaf springs re arched?

Few companies have the equipment and know how required to heat-treat a spring. This makes the process much more costly than cold setting. A pair of leaf springs was recently re-arched by the cold setting process at a cost of $100. It would cost a minimum of $450 to have the same job done by the heat-treating method.

How long does it take to replace leaf spring?

How long does it take to replace leaf springs? If your leaf spring bolts are rusted, or you break a weld nut inside the uni-body, it can take anywhere from one hour to one day to change a leaf spring, depending on your available tools, mechanic skills, and previous experience changing Cherokee leaf springs.

Does add-a-leaf stiffen ride?

I put the short add-a-leaf from Pro Comp on the back ,and yes it does arch your existing springs a little. I got 2″ of lift from mine. It does have a stiffer ride. Pretty stiff.

Are add-a-leaf kits good?

Adding an add-a-leaf buys you just a bit of extra time before you need to replace them. As far as ride quality goes, I would say that doing the add-a-leaf makes the truck feel smoother, even though people say that it makes the suspension stiffer.

Can you add-a-leaf spring to a f250?

Adding a leaf to your truck’s leaf springs is a popular, easy, and inexpensive way to achieve a 1.5 – 3″ lift in the rear and add 900 or more pounds of towing capacity to your truck. Add-a-leaf kits generally cost between $75 and $250 depending on the exact model of your truck, and take one to two hours to install.