Quick Answer

How much does it cost for a solid axle swap?

The process generally costs around $2500-$3000, depending on how involved the engineer needs to be throughout. However, it’s a vital component to ensure the vehicle is legal and safely built.

Can you swap axles?

The most common swap is to use a completely different, and hopefully stronger, axle assembly than the one being replaced. One exception is the Dana 60 axle, which comes with a variety of spline counts. For example, the standard 30-spline axleshaft of a Dana 60 is the same as a Dana 44 axle.

Is it hard to do an axle swap?

Now, a solid axle swap is not exactly an easy feat. But for those with the right skill set or will to learn, it’s definitely doable. Despite the old Toyota IFS being a great system, it lacks wheel travel and articulation. That’s why this serious off-roader opted for a solid axle swap.

Is Dana 60 a ton?

The Dana 60 and Dana 70 are two heavy-duty variants in the Dana axle line, and are typically found in 3/4 ton and 1 ton pickup trucks.

Why is solid axle better than ifs?

A solid axle has less moving parts and is easier to service, with no crossmembers clogging everything up. I also don’t like that the centersection in many new IFS rigs is made of aluminum. Solid-axle centersections are typically cast iron, which is more durable.

What does SAS mean trucks?

As a cost reduction partner, Toyota’s unique system of active stability, or SAS, focuses entirely on making operators more productive while protecting the operator, the forklift, the materials handled, and the facility.

What does solid axle swap mean?

A “solid axle swap” refers to replacing Independent Suspension with a solid or beam axle. There is still an operational differential.

What’s better 10-bolt or 12 bolt rear end?

First, the 10-bolt’s pinion shaft diameter is 1.438 (25 splines) while the 12-bolt is 1.625 (30 splines) which makes the 12-bolt 13 percent larger in diameter and therefore stronger.

How do you do a rear end swap?

How To Do A Rear Axle Swap – RA24 Toyota Celica Project

What are the advantages of a solid axle?

“A solid axle setup can improve traction over big bumps and hills as well as gain more torque from the differential as there are fewer parts that power must transfer through,” says aftermarket manufacturer Fab Fours in a comparison between both systems.

How do you do a differential swap?

Differential Swap | TruckU Tech Tips

What is solid front axle?

A beam axle, rigid axle or solid axle is a dependent suspension design in which a set of wheels is connected laterally by a single beam or shaft. Beam axles were once commonly used at the rear wheels of a vehicle, but historically they have also been used as front axles in four-wheel-drive vehicles.

Is Dana 44 better than 60?

Like we said above, the Dana 60 is the stronger axle. If you want to run big tires or big power you need a Dana 60 axle. At the same time, the Dana 44 is a great axle if you don’t need giant tires or big power. Most people don’t realize how heavy a Dana 60 is and how much unsprung weight affects handling.

What’s the difference between a Dana 44 and a Dana 60?

The Dana 44 differential cover will measure about 9 1/2 inches wide and 10 1/2 inches tall, while the Dana 60 differential cover will measure about 11 1/4 inches wide and 12 inches tall. Beware: The Dana 70 differential cover measures the same as the Dana 60 cover.

How much torque can a Dana 60 handle?

Both versions have a torque output rating of 5,500 lb-ft. The Dana 60’s ring gear is 9.75 inches in diameter, and the available gear spread ranges from 3.31:1 to 7.17:1.

Can you rock crawl with ifs?

Sure, an IFS rig can be built to work in the big rocks, but cost and simplicity tend to keep the solid axle alive when it comes to rockcrawling.

Who is IFS officer in India?

The Indian Foreign Service (IFS) is the diplomatic arm of the Government of India under Group ‘A’ Central Civil Services.Indian Foreign Service.

Service Chief
Foreign Secretary Harsh Vardhan Shringla, IFS
Minister of the Service
Minister of External Affairs Subrahmanyam Jaishankar, MP

What is IFS suspension?

Most modern vehicles have independent front suspension (IFS). Many vehicles also have an independent rear suspension (IRS). IRS, as the name implies, has the rear wheels independently sprung. A fully independent suspension has an independent suspension on all wheels.

What is SAS in a car?

That’s why we put together this overview of a car steering and suspension (SAS) system.

What is a SAS Toyota?

TOYOTA’s exclusive System of Active Stability (SAS) Unique to Toyota forklift trucks, System of Active Stability (SAS) is a patented dynamic system, which constantly monitors forklift operations and automatically takes corrective action when it senses factors that could lead to truck or load instability.

What is SAS light?

SAS Go Light is a supplementary low-cost offering, aimed at people who want to travel without checking in luggage.

Is IRS better than solid axle?

The reason is simple. An independent rear suspension doesn’t necessarily perform better than a well-designed solid-axle setup. This is especially true for vehicles with a lot of front weight bias, like a Mustang.

What are the disadvantages of a solid rear axle?

-Solid axles are heavy, adding to a vehicles weight and when manufacturers go to extreme measures to make them lighter they tend to become a shadow of their former selves. These light-duty versions tend to bend and crack when those of us who push them, push them.

Is Posi the same as limited slip?

Despite the fact that a lot of folks confuse the terms “posi” or “Positraction” with “limited slip,” the fact is that the two are basically one and the same. Today, all positive traction systems are referred to as limited slip systems.

Why is a 12 bolt rear end good?

The 12-bolt positions the pinion-gear higher on the ring gear, which reduces the load on the pinion. This results in less parasitic loss from the friction caused as the gears mesh. Introduced in 1964, the 12-bolt rearend became a staple for Chevrolet racers.

How much horsepower can a 8.2 10 bolt handle?

Roughly 550 to 600 HP total. No slicks, drag radials. No problems with the 8.2 at all. I used the stock diff., the Auburn would be better.

Will a Tahoe rear end fit a Silverado?

No. You shouldn’t try fitting a Silverado differential into a Chevy Tahoe.

What vehicles have a Ford 8.8 rear end?

Common Applications

  • 1986-2014 Ford Mustang.
  • 1982-2012 Ford F-150.
  • 1982-1996 Ford Bronco.
  • 2001-2005 Ford Explorer Sport Trac.
  • 1991-2011 Ford Ranger 4.0L models.
  • 1991-2001 Ford Explorer (Solid axle)
  • 1985-2011 Ford Panther platform vehicles.
  • 2012–Present Ford F-150 (Super 8.8, depending on engine and other options)

What is a GM 14 bolt rear axle?

The General Motors Corporate 14 bolt is a heavy duty, full floating rear axle used in 1973 to 2001 Chevrolet and GMC pickups. It is not to be confused with the smaller, semi floating 14 bolt axle, which uses a 9.5″ ring gear and is built for 3/4 ton applications.