To find out which 0331 you have, shine a light down in the oil filler cap and look at the surface of the head between the #3 and #4 cylinders. Below is a pic another member here posted a while back of an original 0331 on the left, and a Clearwater 0331 on the right.
Where do 0331 heads crack?
Most “0331” heads are cracking on the valve spring side (which won’t cause a miss). If it’s between an exhaust port and the water jacket, you’ll have steam coming from the exhaust but the engine will run fine.
Are all Jeep 4.0 heads the same?
Not so! The heads will swap mechanically, so they’ll bolt right up to the block (the 258 and 242ci heads, 1975 and later, use the same screw pattern and can use much the same gasket.) Yes, the 0331 head (1999-2006) will have the coil rail bosses that the previous heads will not.
Where is the casting number on a jeep 4.0 HEAD?
It’s on the driver’s side. Use a GOOD light to help you read it! Above &
between the #3 &
#4 exhaust ports, outside the valve cover rail. It’s a four-digit number.
What Jeeps have the 4.0 inline 6?
The following years and Jeep models have 4.0L straight-6 engines:
- 1987-2001 Jeep Cherokee.
- 1993-2004 Jeep Grand Cherokee.
- 1987-1990 Jeep Wagoneer.
- 1987-1992 Jeep Comanche.
- 1991-2006 Jeep Wrangler.
What year is jeep 4.0 interchange?
The 4. During the period between 1987 and 2006, Jeeps used a 0 liter engine, and it remains with us forever.
What years did the Jeep Wrangler have the 4.0 engine?
However, one thing all of us can agree on is the fact that the Jeep 4.0 engine is downright legendary. The 4.0 liter Jeep engine was used in Jeeps from 1987 to 2006 and it’ll never be gone from our hearts. However, the origins of the Jeep inline 6 date back even further.
How much does a jeep 4.0 head weigh?
The block, clean and stripped, weighs 138 pounds. The head without valves, springs or rockers weighs 65 pound. The crank weighs 57 pounds.
How do I know if I have a 4.0 Jeep engine?
4.0L Engine Date Codes
- 1st Digit-The year (8 = 1998).
- 2nd & 3rd Digits-The month (01 – 12).
- 4th & 5th Digits-The engine type/fuel system/compression ratio (MX = A 4.0 Liter (242 CID) 8.7:1 compression ratio engine with a multi-point fuel injection system).
- 6th & 7th Digits-The day of engine build (01 – 31).
How can I tell what year my Jeep engine is?
Engine date code. The date code is on the passenger side of the engine, on the block, just forward and up from the distributor on a machined flat surface. The digits of the code identify: 1st Digit-The year (8 = 1998).
Why is the Jeep 4.0 so good?
The Jeep 4.0 liter six-cylinder engine provided good acceleration from low speeds in Jeep Wranglers and Cherokees for years, with high torque at low engine speeds. It was used in other vehicles (such as the Grand Cherokee) as well, a strong, durable performer loved by its owners.
How much horsepower does a 4.0 inline 6 have?
4.0 Straight-Six Engine Specs
|Bore x Stroke||98.4mm x 86.7mm|
|Compression||8.8 : 1 to 9.2 : 1|
How long will Jeep 4.0 last?
According to the manufacturer, the Jeep 4. It is generally possible for an 0 engine to last approximately 200k miles and some even make it 300-400k without a single problem. Longevity and reliability are two good things to consider.
Are all Jeep 4.0 engines interchangeable?
Just think of it as swapping in a long block. XJ Cherokee and ZJ Grand Cherokee 4.0L engine blocks interchange. 2000+ TJ Wrangler and WJ Grand Cherokee 4.0L engine blocks interchange. XJ/ZJ blocks, and the 2000+ TJ/WJ blocks do not interchange without significant modifications.
Will 99 TJ engine work in XJ?
You can also use 91-01 XJ, 93-98 ZJ, 91-95 YJ, 97-99 TJ engines, but you will need to purchase separate coil pack adapter brackets since the 00-01 is a coil pack motor and earlier engines do not have mounting provisions. It would be cheaper and easier to just find the correct 00-01 motor.
Will a Jeep Cherokee engine fit in a Wrangler?
Will A Cherokee Motor Fit In A Wrangler? There are two x Cherokees and one ZJ grand Cherokee. Interchanges are blocked by the 0L engine. It includes the TJ Wrangler 2000 and the WJ Grand Cherokee 4 models.
Is the Jeep 4.0 inline 6 reliable?
With so many inline-6 engines on the market, the jeep 4.0 engine is one of the best when it comes to reliability. Due to the simplicity of the engine, which stood the test of time going all the way back to the 1960s when it was first introduced.
Is the Jeep 4.0 i6 a good engine?
Chrysler’s 4.0L Straight Six Engine
The 4.0L AMC inline six is known as one of Chrysler’s best engines. Dating back to 1986, its torquey 190 hp engine would commonly chug along for upwards of 300,000 miles. Over the course of nearly 20 years this engine was refined and tweaked before being phased out in 2006.
Is the Jeep 4.0 fuel injected?
Ta-da, a 242ci 4.0L six-cylinder arrives in the Cherokee and Comanche. The 177hp and 224lb-ft of torque inline-six has a multiport fuel injection and a high-flow cylinder head, plus a larger bore and shorter stroke than the 4.2L (3.88×3.
How much does a 3.7 Jeep engine weigh?
The Jeep Cherokee (KJ) 3.7i V6 has a V 6, Petrol engine with 3700 cm3 / 225.8 cu-in capacity.
|Jeep Cherokee (KJ) 3.7i V6 Size, Dimensions, Aerodynamics and Weight|
|Curb Weight :||1822 kg OR 4017 lbs|
|Weight-Power Output Ratio :||8.6 kg/hp|
How heavy is a 2Jz engine?
How Much Does A 2Jz Short Block Weight? The stock 2jzge weighs roughly 475 pounds when it comes to w/speakers, and its biggest weight is 650 pounds when it comes to w/o transmissions as opposed to the stock 2jzge which weighs approximately 500 pounds.
How much does an lq4 weight?
It weighs in at 216 pounds.
How can I tell what year my XJ is?
The VIN is comprised of 17 alphanumeric characters. Locate the tenth character of the VIN, counting from left to right. This character will tell you the year of the Jeep (this only applies to Jeeps built after the 1970s).
How do I know what engine is in my Jeep?
How Do I Find Out What Engine My Jeep Has? On the driver’s side of your car, you can find the VIN in the lower corner. In the series of numbers and letters, the tenth from the left represents the model year, and the eighth represents the engine code.
Where is the serial number on a Jeep engine?
Examine the right side (driver’s side) of the engine below the distributor and above the oil pan. The casting numbers are typically found on top of the engine head in the right front corner.