Quick Answer

Question: How wide are stock JK fender flares?

MetalCloak’s JK Wrangler Overline Front Flare options are available in narrow width 6″, standard width 8″, or wide width 10″ MetalCloak Overlines are the original and only Removable Steel Fender allowing you to run 37’s on a stock JK.

Do jeeps need fender flares?

Most states have a legal requirement that fenders and flares must cover the tread of the tire (or in some cases, the full tire) as a lack of covering can easily kick up debris and rocks at other cars when on the road.

Are fender flares a good idea?

Overall, fender flares are an excellent accessory for any truck. They’ll make any truck look more aggressive, and they’ll protect your truck and other vehicles on the road from mud, rocks, and debris. The best part is, in the modern automotive accessory market, there are fender flares available for any truck.

Do fender flares hurt the paint?

Yes this is a common problem with fender flares. It’s caused by the tiny amount of movement between the flare and the truck. If it ever wears through the paint, it will be a pathway for rust to start, causing the paint to bubble.

How wide are Jeep fenders?

The fenders are 12.75-inches wide in the front and 8.75-inches wide in the rear.2018-22 Jeep JL Wide Fender Flares | Front & Rear.

Jeep Wrangler JL 2018-2022
Jeep Wrangler 4Xe 2021-2022

What are Jeep fender flares?

Jeep Fender Flares

ARIES Jeep Wrangler fender flares are designed to show off larger, offroad tires better than the factory flares. Our inner fender liners also offer better protection for the engine compartment. Both are made from powder-coated aluminum and have a vehicle-specific fit.

What is the difference between a fender and a fender flare?

An extended form of the car fenders that gives extra coverage to extra-large tires. They look exactly the same like fender on a car, but fender flares are much bigger than the regular ones.

What kind of plastic are Jeep fenders made of?

Yes, they are smooth plastic. The unpainted fenders are also plastic but have a textured surface.

Will fender flares slow rust?

Nope, sorry fender flares will not prevent rust as there are only added to help protect the wheel well of the fender and the paint on your ride from flying debris.

Do you have to drill holes for fender flares?

Most fender flares only look bolted: in most cases, no drilling at all is required in installation. Just plug in the year, make, and model of your truck in the online order form and the flares will fit perfect without any alteration to your truck.

Will fender flares cause rust?

Fender flares protect your fenders from the elements, but they do not prevent rust and they may in fact make your fenders more prone to rust.

Can you put mud flaps on with fender flares?

Combining mudflaps and fender flares is generally acceptable, but you need to verify the local road safety guidelines in your area if this style is allowed.

Do Bushwacker fender flares scratch paint?

Bushwacker Fender Flares Will They Scratch Your Truck? 9 Months Later

What’s the purpose of fender flares?

An extension of the Fender that provides additional coverage for heavily offset or oversized wheels and tires. Fender Flares will keep a truck or SUV in compliance with Vehicle Equipment Laws, which lowers the likelihood of Police fines.

How wide are Rubicon flares?

The OEM fender flares for the TJ/LJ “SE,” “X” and “Sport” models are 3.25″ wide. The OEM fender flares for the “Sahara,” “Rubicon,” and the special editions that came from the factory with body colored flares are 4.25″ wide.

How wide are Poison Spyder fenders?

These Extra-Wide Crusher Flares™ measure 10-3/4″ wide at the widest point (measured from the Jeep’s body sheet metal). Compared to the stock plastic flares and our Standard Width Crusher Flares™ which both measure 8-3/4″, the Extra-Wide Crusher Flares™ provide an extra 2″ of tire coverage.

How much do Jeep fenders cost?

Depending on the model of jeep, the cost of replacing a fender flare could range from $300 to $500.

What is a Jeep fender?

The fenders on your Wrangler are responsible for a lot of jobs. They keep the rest of your Jeep protected from debris that gets kicked up from your tires like water, mud and rocks. They can also give your Jeep the tire coverage needed to keep you street legal!

What is the part above the wheel on a Jeep called?

Jeep fenders and flares are some of the most iconic parts on your vehicle, serving to protect others from the rocks and dirt you cast off the tires and the rest of your Jeep from getting all dinged up.

How do I choose fender flares?

Choose Your Style

In short, fender flares are typically available in 4 different style buckets: OE Style, Street Style, Pocket / Bolt Style or Extended Style. If you’re looking for a sleek or OE style look, or just want to hide a small amount of rust or fender damage, the OE or Street style may be what you need.

What are OEM flares?

OEM fender flares are made to keep the contours of your original manufacturer styling but also to suppliment protection to the wheel wells and the sides of your truck from debris that gets thrown up from the tires. They can also add a little mor coverage for wider tires and give a healthy style boost.

What does OEM fender flares mean?

In other words, “OE” stands for “Original Equipment.” Most often you’ll see the term OEM, meaning Original Equipment Manufacturer, or made by them, for instance. While none of the OE style fender flares are made by the OEM, they are intended to match well with the original equipment.

How do I keep my Jeep fenders black?

How To Keep Jeep Fenders and Bumpers Black and Clean

How do I make my Jeep fenders black again?

The best way to restore your Jeep Wrangler fenders back to black is by washing them with a PH-neutral water-based fragrance-free product. Thereafter apply a UV protective product that is 100% free of grease-producing silicone oils and petroleum distillates.

How do you restore the faded plastic on a Jeep?

A heat gun can also help to restore a Jeep’s black plastic. The heat from the heat gun causes the oils in the plastic to rise to the surface, and in doing so, it restores the plastic’s original look. When using a heat gun, you must also clean the surface of the black plastic before starting the heating process.

How much are fender flares?

Aftermarket wheel fender flares may cost you anywhere between $10 and $890. Several factors affect pricing, such as its material, recommended use, finish, attachment style, set inclusions, and more. Labor may cost you an extra $125 up to $1,000, depending on the type, year, and model of your vehicle.

How do you fix a rusty fender flare?

How to Fix Fender Wheel Well Rust on Your Truck Without Welding …

How do you Bondo a fender well?

How to Repair Rust Holes Around the Wheel Well

  1. Sand the rusted area well.
  2. Cut the rusted hole to even, non-rusted edges.
  3. Repair the section with a mixture of fiberglass/bondo resin over mesh.
  4. Sand the patched area until it is level with the panel.
  5. Spray the area with primer paint.