Quick Answer

Question Is 0W-30 better than 5W-30?

A 0W-30 grade can operate at much lower temperatures than a 5W-30 as the oil will flow faster thereby protecting the engine at an earlier stage. Some engines are not suited for a 0W-30, always check your owner’s manual before adding oil to your engine.

Is it OK to use 0W-30 instead of 5W-30?

Yes. Viscocity oils flow slower than viscosity oils, so 5W30 will flow faster than 10W30 and 0W30 will flow faster than 5W30.

Can I mix engine oil 0W-30 and 5W-30?

you should be fine. the weights are neraly identical. The 0W is for cold weather and economy, the 5W is a end of winter/spring weight.

What car uses 0W-30?

What Car Uses 0w30?

Castrol 152B99 0W30 Check Price Valvoline SAE 5W30 Check Price
– Mercedes Benz – Volkswagen – Toyota – Subaru – Mazda – Lexus – Nissan – Works well with leading synthetic and conventional petrol engine oils – Holden, – Ford, – Nissan, – Toyota, – Mazda, – Subaru.
Check Price Check Price

What vehicles use 0W-30 oil?

0W-30 oil is used for most modern engines (including diesel and gasoline engine models), passenger cars, and light trucks. SAE 30 oil is used for smaller air-cooled engines like small tractors and lawnmowers.

Is 0W-30 the same as SAE 30?

A: NO, this is NOT the same as 0W-30 oil. This type of oil, SAE 30W, is a single weight oil
0W-30 is a Multiweight oil. In general, the two oil types are NOT interchangeable.

What does 0W-30 mean?

It actually stands for Winter. That’s because 0W-30 engine oil is formulated to flow like a 0 Weight oil in cold conditions, yet offer the protection of a 30 Weight motor oil when the engine reaches its full operating temperature.

Can you use 0w40 instead of 0W-30?

For winter, the use of both 0w-30 and 0w-40 oils are equally good for this purpose and will do their job, the temperature range being somehow small but it can have a great impact on the engine overall, especially in higher temperatures.

Can I use 10w30 instead of 0W-30?

We get asked this question so often that we have included this special page dedicated exclusively to answering the question. AMSOIL 0W-30, 5W-30 and 10W-30 synthetic motor oils are ALL 30 weight oils. The answer is that ANY one can be used regardless of the vehicle owners manual recommendation.

Can you use 0W20 instead of 0W-30?

The 0w20 motor oil is recommended by most brands and can be used in place of other motor oil that has been recommended. The 0w30 motor oil, on the other hand, is recommended for gasoline-fueled cars, vans, and even trucks.

What is 0W-30 oil used for?

Switching to a Mobil™ 0W-30 advanced full synthetic formulation motor oil can help to increase engine efficiency and improve fuel economy versus higher viscosity oils. 0W-30 is widely suggested by American, European and Asian automakers as a viscosity alternate to higher viscosity oils for driving in frigid weather.

Is 0W-30 good for diesel engine?

Mobil 1 ESP 0W-30 motor oil is especially recommended for the high-performance gasoline and diesel engines in the latest passenger cars, SUVs and light vans. It is not recommended for two-cycle or aviation engines unless specifically approved by the manufacturer.

Can I use 5w40 instead of 0w30?

Re: Help with oil! 0w30 or 5w40. 40 is thicker than 30, but it will be fine.

Is 0W 40 better than 5W-30?

Since both 0W-40 and 5W-30 are winter-grade oils, they’ll work effectively in cold temp regions. 0W-40 oil flow can normally go down to -40℃, whereas 5W-30 oil flow can go down to -35℃. When it gets hot, 0W-40 oil shows better performance than 5W-30, with the ability to perform well up to +40℃.

Which is better 5w30 or 5w40?

5w30 can be used by different type of vehicles and in different range of temperatures, but is ideal for colder temperatures. 5w40 is often used in higher mileage engine sand performs better in warmer temperatures.