Quick Answer

Question: Is a come along a cable puller?

A similar tool to a come-along is a cable puller, which does not have a drum and ratchet but directly grips the cable, allowing unlimited lengths of wire rope to be used.

How do you get cable out of a come along?

Releasing Tension on a Harbor Freight Come-Along | Quick Tip

What is a come along tool used for?

Come-alongs are often used to pull ships’ mooring lines. These tools are used for pulling joints together, for straightening heavy panels while putting them in place, as safety ties, and for pulling the frame of a new construction together during its raising.

How do you use a cable hoist puller?

How to use a cable puller?

  1. Step 1 – Disengage main ratchet drive. First, locate the drive pawl spring on the lever handle and pull it to the ‘up’ position to disengage the main ratchet drive.
  2. Step 2 – Attach load hook.
  3. Step 3 – Release cable.
  4. Step 4 – Release stop pawl trigger.
  5. Step 5 – Attach anchor hook.

What is a come along really called?

A come along (also called a wire rope hand ratchet puller) is a manual device that can make moving heavy loads by hand possible.

How much does a come along weigh?

Technical Details

Manufacturer ‎JABETC
Item Weight ‎13.9 pounds
Package Dimensions ‎27.99 x 5.59 x 4.41 inches
Is Discontinued By Manufacturer ‎No
Manufacturer Part Number ‎Na

How do you use a Comealong to pull up a tree?

Attach one end of a come-along to a stationary object within 25 feet — the usual length of come-along cables — of the root. One possibility is to wrap a chain around a tree and attach the come-along to the chain. Another is to position your car near the root and attach the come-along to the tow hitch.

How do you use a come-along to tighten a fence?

Grasp the lever on top of the come-along with one hand and support the base of the come-along with the other. Push the lever in the direction of the post you are attaching the wire to. Continue moving the lever until it gets tight, then turn it an additional one or two times.

How long is the cable on a come-along?

12 ft.

Product: Come-Along
Cable Length: 12 ft.
Cable Lift: 12 ft.
Cable Diameter: 3/16″
Leverage: 15:1

What is the mechanical advantage of a come-along?

A come along has a built in 1:1 mechanical advantage but when the block pulley is used, a 2:1 mechanical advantage is created. One problem when using the block for a 2:1 mechanical advantage is the amount of cable needed. A 2:1 mechanical advantage uses nearly double the amount of cable that the 1:1 setup uses.

How does a chain come-along work?

Come Along Tool Basic

What is cable puller?

A cable puller, aka cable tugger, is used to pull cable through a conduit. Rope, which is lighter and more flexible than cable, is manually pulled through the conduit, then tied to one end of the cable being pulled. With one person guiding the cable, the electric cable puller does all of the hard work.

How do you use a cable puller on a bike?

Your browser can’t play this video. Learn more

What is a concrete come-along?

A concrete come along rake allows you to push and pull concrete into place without stopping. Tool is lightweight but thick enough to stay rigid during use. Features a long handle so you can level the concrete effectively from a distance.

Has come a long way?

If you say that someone or something has come a long way, you mean that they have developed, progressed, or become very successful. He has come a long way since the days he could only afford one meal a day. weather or whether?

How far can a come-along pull?

A standard come along usually has only about a 7- to 10-foot pull length. That means your anchor point needs to be relatively close to your towing object, or another length of strap or cable will be necessary.

How much do a come-along cost?

Compare Similar Winches

current product Top Rated
Steel Core Maasdam
4-Ton Come-Along Cable Puller Hand Winch with Single or Double Hook Assembly 2,000 lb. 1-Ton Capacity 12 ft. Max Lift 15:1 Leverage Winch Puller Come Along Tool with 12 ft. of Cable Included
$2999 $2998
(58) (137)

Are hand winches any good?

Hand winches are like bicycles in that respect: independent of fuel other than muscle power, but tiring for the uninitiated to operate. Nonetheless, a hand winch is a very useful backup to a power winch and essential kit for solo-vehicle, off the beaten track travellers.

Can you pull a stump with a come-along?

A come-along can help remove medium-sized tree trunks. While the stumps of small trees are relatively easy to remove my hand, and expensive grinding is required to remove the stumps of larger trees, medium-size trees may be too large to remove by hand and too small to grind. A come-along can help in this situation.

How can I come-along?

How to Use a Come Along

How do you cut a tree with ropes?

How to Cut Down a Tree : Tying a Rope Anchor when Tree Felling

How do you use a fence post puller?

How It Works

  1. If you’re working in soft soil, you’ll need a board to support the base of the puller.
  2. Lift the handle up so that the jaws completely open.
  3. Push down on the handle so that the jaw clamps the post or stake and starts pulling it out of the ground.

How do you make a 2×4 fence puller?

HOW TO MAKE A AMISH FENCE STRETCHER

What is a winch used for?

A winch is intended to be used with the pulling vehicle or anchor stationary as part of a static pull. Unspooling winch line to a stuck vehicle, throwing the unstuck vehicle in reverse and giving a yank (kinetic pull) on the stuck rig is very hard on the winches brake and drivetrain.

How do you use a manual hand winch?

Turn the crank handle or push and pull the winch lever to tighten the cable. Continue working the crank or lever to pull the object you want to move. Stop working the winch when the object has been moved into the desired position. Release the tension on the winch cable.

How do you use a manual winch?

How to Use Tyler Tool Hand Winches