Quick Answer

Question: What is a 1 ton axle?

Most trucks that came from the OEM with a Dana 60 in front were paired with a Dana 70 or 14 bolt axle in the rear, and they were both called 1 ton axles. This is most likely because the rear axle in a truck carries more weight than the front (when loaded).

Why is it called a TJ?

Registered. TJ stands for “True Jeep”.

How big is a TJ?

Jeep Wrangler (TJ)

Jeep Wrangler TJ
Wheelbase 93.4 in (2,370 mm) standard 103.4 in (2,630 mm) LWB
Length 1996–99: 151.2 in (3,840 mm) 1999–2003: 155.4 in (3,947 mm) 2004–06 SWB: 154.9 in (3,934 mm) 2004–06 LWB: 171 in (4,343 mm)
Width 1996–2003, 2004–06 LWB: 68.3 in (1,730 mm) 2004–06 SWB: 66.7 in (1,690 mm)

What does TJ and YJ stand for?

# YJ: The Jeep Wrangler model built from 1987-1996. # TJ: The Jeep Wrangler model built form 1997-Current.

Is a 14 bolt A 1-ton axle?

The 14-Bolt Is The Ford 9-Inch Of 1-Ton Trucks

Every diesel-powered pickup sold in the United States for the last 10 years has a full-floating rear axle.

Is Dana 44 better than 60?

Like we said above, the Dana 60 is the stronger axle. If you want to run big tires or big power you need a Dana 60 axle. At the same time, the Dana 44 is a great axle if you don’t need giant tires or big power. Most people don’t realize how heavy a Dana 60 is and how much unsprung weight affects handling.

What does Jeep CJ mean?

In 1944, Willys-Overland, one of the two main manufacturers of the World War II military Jeep, built the first prototypes for a commercial version – the CJ, short for “civilian Jeep“.

What is Jeep an acronym for?

Another explanation is that jeep is actually an acronym for “just enough essential parts,” a nod to the simplicity and reliability of the vehicle.

What do Jeep initials stand for?

Acronym. Definition. JEEP. G-P from the military General Purpose vehicle.

Is a 2002 Jeep Wrangler a TJ?

The Jeep Wrangler TJ (1996 – 2006) is the second generation Jeep Wrangler model .

Is a 2005 Jeep Wrangler a TJ?

The Wrangler TJ was the last Jeep to utilize American Motors parts. After the 2006 model, the door handles, AMC straight 4 and AMC straight-six engines were removed. 1997-2006
SE: available in right-hand drive with all standard fittings. 2.5L from 1996-2002, 2.4L from 2002-2006 and 4.0L from 2005-2006.

How wide is Jeep TJ?

Jeep Wrangler’s come with either a hard or soft-top roof with the option to be completely open. The Jeep Wrangler (1998) has an overall length of 12’7” (3.84 m), wheelbase of 7’9” (2.37 m), width of 5’7” (1.70 m), and height of 5’10” (1.78 m).

What does Jl mean in Jeep?

Posted by Justin Hartenstein on Apr 10, 2019. If you have a 2018 Wrangler, you may have wondered, “Is my Jeep a JK or a JL?” The JL is the newest model of the Wrangler, so if you have a 2019 or 2020 Wrangler, then it is a JL.

Which is better YJ or TJ?

In other words, for overall comfort both on the road and even on trails, the TJ is superior. The TJ also offers more flex, making it a better option for rock crawling, while the YJ is more likely to be caught with at least one tire in the air. The TJ ran all the way through the 2006 model year.

What does Jeep WJ mean?

WJ: Grand Cherokee 1999 – 2004. ZJ: Grand Cherokee 1993 – 1998.

Is a 14 bolt rear end a 1 ton?

GM’s Strong &amp
Plentiful Axle

First appearing in 1973, the 14-bolt is one of the most used rear axles in the General Motors stable. Found under ¾- and 1-ton GM trucks, vans and SUVs, the 14-bolt received a max torque rating of 6,242 pounds.

What is a 14 bolt full floater?

Full-float axles have a tell-tale “axle end” that sticks out from the wheel surface. This is because the wheel hub on a full-float 14-bolt axle will stick out beyond the wheel mounting surface anywhere from about two to four inches. The full-float axle bolts to the end of the hub.

Are all 14 bolt full-float?

GM 14 bolt axles were available in semi-float and full-float versions, and there are two types of hubs found on 14 bolt axles. Also, two different types of drums were used. Unless you are really into axles, it can be a little confusing to know which axle you have.

Can a Dana 44 handle 37s?

No problem at all! Get a Dana 44 front, some upgraded axle shafts, and you should be able to handle the 37s fine, as long as you don’t drive it like a complete moron, in which case you can break just about any axle!

What’s the difference between a Dana 30 and Dana 44?

The only difference between the JK Dana 30 and Dana 44 is ring gear size, electronic locker, and bigger shafts. (even if she insists shaft size doesn’t matter…) You’re better off just starting with an aftermarket Dana 44 that is a “true 44”.

How do you tell if you have a Dana 30 or 44?

The quickest way to tell is to look at the top of the steering knuckles where the Front End Housing is connected to the Knuckle. On a Dana 44 Model, you will see a large castle nut threaded onto a ball joint. For Dana 30 Models, you will see a king pin cap with four bolts threaded down into the top of the knuckle.

What makes a Jeep a TJ?

The TJs were produced from 1997-2006. The Unlimited TJ models are also known as a Jeep TJL, because their wheelbase is longer than the regular TJs. Another way to identify a TJ is the grille. On a TJ it’s vertical, but has a slight “bend” to it, just a little more than halfway up.

Which is better CJ5 or CJ7?

For tight trails and mud holes, the CJ5 is the better option. Also, you’d prefer the CJ5 if you’re going for a unique vintage look. If you’re tall and want more leg room, the CJ7 is the better choice for you. The same is true if you’re planning to swap the manual transmission for an automatic.

Did Jeep make a Wrangler in 1996?

There were no 1996 model year Jeep Wranglers. The last YJs were sold as 1995 model years but featured a few new parts not seen on any earlier YJ.

Why do jeeps say Willys?

This Jeep was called the Willys because the government selected a vehicle based on the fashion of the Bantam Car Company. Bantam lacked the production facilities to mass-produce, and the military wanted suppliers, so Willys got a contract to build this model of Jeep in the late 1940s.

Did Ford make the first Jeep?

Yes, Ford created the first Jeep in 1940, one year before Willys built their MB. It was called the GP, or “Government Pygmy”, and it was ugly as sin.

How much is a CJ2A worth?

A: The average price of a Jeep Willys CJ2A is $12,632.

What engine is in a 1989 Jeep Wrangler?

The 1989 Jeep Wrangler came with one of two engines. Almost all models came with a 4.0-liter, straight six-cylinder engine. This engine provided 177 horsepower and 224 foot-pounds of torque. The Laredo hard top featured a 4.2-liter straight six-cylinder engine producing 112 horsepower and 210 foot-pounds of torque.

What is the difference between a TJ and YJ Jeep?

YJ Jeeps were sold from 1986 to 1995. The TJ was the second-ever Wrangler model to be sold. It was produced from 1996 to 2006. Visually, the TJ took a step back, borrowing many of the design cues of the original CJ Jeep, returning to the old circular headlights and traditional windshield wipers.

Why are there 7 slots in a Jeep grill?

After the war in 1945, Willy’s wanted to produce the Willys MB for civilians. However, the nine-slot grille was Ford’s design, so Willy’s couldn’t trademark it. So Willys subtracted two of the nine slots to make it a seven-slot grille and this was enough of a change to get a trademark.