Quick Answer

Question: What size is the stock turbo on a 12 valve Cummins?

The stock specs for a 12-valve Holset HX35 will vary from year to year and whether the truck was a manual or auto, but the compressor inducer will be between 54 and 56mm. While popular upgrades for common rail trucks range between 64 and 67mm, a hot street 12-valve 5.9 needs to be a bit smaller.

What turbo does a 12v Cummins have?

Holset Fixed Geometry Turbocharger

1st Gen 5.9L Cummins Years: 1989-1993
Compression Ratio: 17.0:1
Firing Order: 1-5-3-6-2-4
Fuel Injection: Bosch VE44 Mechanical injection pump, mechanical injectors, direct-chamber fuel injection
Turbocharger: Holset Fixed Geometry Turbocharger (VGT)

How much boost does a stock 12 valve Cummins have?

Stock you won’t see much more than 25psi. Depending on the turbo you currently have you don’t want to run above 32-35psi.

What size is a stock Cummins turbo?

Stock turbochargers usually have large exhaust housings, large-diameter turbine wheels, and smaller compressor-side inducers. For instance, an HX35 turbo from a 5.9L Cummins measures somewhere around 54/69/14, which means it has a 54mm-inducer compressor wheel, a 69mm-inducer turbine wheel, and a 14cm2 exhaust housing.

How much horsepower does a stock 12 valve Cummins have?

The Cummins 5.9-liter 6BT 12 valve has 230 HP, 440 lb-ft of torque, and a P7100 inline injection pump right out of the box. The 12-valve is also a popular engine swap choice, powering a slew of Jeep, rat rod, muscle car, and dragster projects.

How do I get more power out of my 12 valve Cummins?

Double The Horsepower of Your 12 Valve Cummins | Power Driven Diesel

What’s better 24v or 12V Cummins?

When it comes to serious power and performance the 12v 5.9 Cummins takes the win. These engines are known to hold up better at extreme power levels when compared to the 24v engines.

Are 12V Cummins reliable?

The Cummins 12v/6BT is widely regarded as the best and most reliable diesel engine ever produced. These engines are extremely simplistic, operating with mostly mechanical components rather than complicated electronic ones. The simplicity allows for massive power potential in conjunction with ultimate reliability.

Why are 12V Cummins so good?

What made the Cummins so popular was the fact that its peak power and torque was insanely usable—in fact, the redline is only at 3,000 RPM! The 12-valve was able to get respectable fuel economy while producing torque figures never-before seen in an ordinary pickup truck.

How much boost does a 5.9 Cummins make?

On 1998.5-2004 5.9L Cummins you will need to physically modify your wastegate to gain more turbo boost. Doing this without the Boost Fooler will result in check engine lights and codes set into the computer. Stock 98-04 trucks should generate 18-23psi of boost pressure stock (depending on year model).

How much HP can a stock 5.9 Cummins handle?

The 5.9L inline-six mill’s factory rotating assembly from ’89 to ’02 is capable of handling 800 hp (1,400 to 1,600 lb-ft of torque) without breaking a sweat, and is often pushed into four-digit territory before aftermarket rods become a consideration.

How much power can a 12-valve handle?

While the factory 12-valve rods can handle 1,000 hp, Scheid Diesel does recommend upgraded rod bolts anytime you’re in the neighborhood of 800 hp. Scheid offers these heavy-duty 12-point rod bolts, made by ARP, which are 23% stronger than the stock fasteners.

Will a bigger turbo make more smoke?

A large turbo can cause black smoke. But that’s usually a case of too large to spool on the low end. Then when it lights it should clear up some smoke or all.

What size is a stock 3rd Gen Cummins turbo?

3rd Gen Cummins Turbochargers in 5.9L Engines.

How do I know what size turbo I need?

The calculation is simple: Divide the absolute outlet pressure that you think you want (14.7 + boost pressure) by the absolute inlet pressure that the Earth says you can have (14.7) and you’ve got your pressure ratio. Limiting yourself to a reasonable number is the hardest part.

Which year 12 valve Cummins is best?

1996-1998 has the best injection pumps (perhaps ignoring the 1989-1993 VE) and stronger automatics compared to earlier years. Look at the buyers guide section in the thread below. The 1998 12 valve trucks were only built in 1997.

How much does a 5.9 12 valve Cummins weigh?

How Much Does A 12 Valve Cummins Engine Weight?

Engine: Cummins 5.9L ISB (commonly referred to as the “24 valve”)
Horsepower: 235 – 325 hp @ 2,900 RPM
Torque: 460 – 610 lb-ft @ 1,600 RPM
Governed Speed: 3,200 RPM
Engine Weight: ~ 1,150 lbs, dry & dressed

What will 4k governor springs do for my 12v Cummins?

The Industrial Injection 4000 Governor Spring Kit is by far the best modification you will ever do to your 12 valve Cummins engine. The factory governor generally will slowly start to defuel the engine around 2300-2400 rpm and drastically decrease performance and pulling power.

How much power can a NV4500 handle?

Registered. The NV4500 will not hold up to steady towing even if you limit it’s input to less than 300HP. If you limit application of power to everything but 4th it should hold up pretty well. Every other gear is on the countershaft, and the countershaft is the weak link of the transmission.

How much is a 12 valve Cummins engine worth?

A shop skilled in Cummins swaps will charge around $12,000 to $15,000 to take a 12-valve version with the 5R110.

How long will 5.9 Cummins last?

The Cummins brand is extremely reliable and prides itself on long-lasting engines. The 5.9-liter engine can expect to churn out 300,000 to 400,000 miles.

Are 5.9 Cummins reliable?

Cummins 5.9 24v Reliability

Outside of the fuel system, the 5.9 24v is a very reliable engine. The engine internals such as the pistons, rod, and crankshaft will last a lifetime and can hold up beyond 500,000 miles.

Is a 12 valve Cummins a V8?

The Cummins engine had been successful in agriculture implements for a few years prior, so in 1989 Cummins and Chrysler introduced the 12 valve as an alternative the the V8 gas powered Dodge. It was a hit immediately for those that wanted double the torque and a better option for fuel economy.

How much HP does a 7.3 Powerstroke have?

7.3L Power Stroke Specs

Engine: 7.3L Power Stroke diesel V-8
Peak Horsepower: • 210 hp @ 3,000 rpm (intro horsepower rating, 1994 MY) • 275 hp @ 2,800 rpm (peak horsepower rating, 2003 MY)
Peak Torque: • 425 lb-ft @ 2,000 rpm (intro torque rating, 1994 MY) • 525 lb-ft @ 1,600 rpm (peak torque rating, 2003 MY)

When did they stop making 12V Cummins?

1994-1998 12V Cummins (12 Valve) Features

These additions help reduce emissions output compared to the previous generation.