Quick Answer

Question: Which is better a 6-point or 12 point socket?

Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners. Here’s why: (1) Six-point sockets have thicker walls, so they’re less likely to flew.

Are 12 point bolts better?

A 12-point bolt design offers the same bearing surface as a hex head cap screw of comparable size. There really is no difference between the two, except the top of the head makes wrenching a little different. The user is able to get it into a counter bore situation when it’s hidden in a hole.

What is the advantage of a 12 point socket?

The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.

What are 12 point bolts used for?

12-Point Bolts are an alternative head design for hex socket cap screws. The flange diameter and head height are designed to fit a range of applications and counterbored holes designed for standard hex socket cap screws.

What advantage does a 12 point opening have over a 6-point opening?

Non-Ratcheting Wrenches

On a non-ratcheting wrench, 12-point box ends benefit from having more positions for engaging the fastener. This can be helpful, especially in situations with limited access. However, the tool is more likely to slip or fail when used on a 6-point fastener, especially if you apply a lot of force.

Can I use a 12 point socket on a 6-point nut?

Compared with the 6-point socket, a 12-point socket has twice as many points, so it can more easily slide onto a hex nut. In other words, you would need to rotate only up to 30 degrees to fit a 12-point socket onto a hex nut.

Why are 12 point bolts used instead of hex bolts in some applications?

The 12 point design permits greater torque to be applied to the bolt and eliminates the rounding of the hex socket that occurs with standard hex sockets. The flange diameter and head thickness of the 12 Point Flange Bolt are equivalent to the head dimensions of a socket head cap screw.

What are 12 point bolts called?

Also referred to as a 12-Point Flange Head Cap Screw, or a ferry bolt, the flange diameter and head thickness of the 12-Point Bolt are equivalent to the head dimensions of a socket head cap screw, thus permitting the 12-Point Bolt to be a replacement for any application that calls for a socket head cap screw.

What is the most common socket drive size?

⅜-inch drive size sockets are the most common and most available.

When would you use a 6 point socket?

Uses of 6 Point Sockets

  1. It’s best for fitting tools that require a massive amount of force. That’s because due to its thicker wall, it’s less likely to slip.
  2. Moreover, if your strip bolts are slipping, then you can use a six-point socket as a solution.
  3. For any fasteners that require a six-point socket.

Will a 12 point socket work on a Torx bolt?

A 10 mm 12 point socket will not slip over the star and a 12 point 11 mm socket spins and will not grab. The special star bolt needs a star socket. Another way to explain it is that the head of the bolt is shaped like a 12 pointed TORX wrench. I need a 12 pointed TORX socket.

Which of the following is an advantage of a six-point socket?

Which of the following is an advantage of a six-point socket? It is stronger.

Do you really need impact sockets?

Impact sockets can be used safely on a hand tool, however you should never use a regular hand tool socket on an impact wrench as this can be extremely dangerous. A regular socket is likely to shatter when used on power tools due to their thinner wall design and the material they’re made from.

What are 8 point sockets used for?

Proto® 8 Point Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials.

What is the difference between impact and regular sockets?

Regular sockets are typically made of chrome vanadium whereas a good impact socket is made from chrome molybdenum. Chrome molybdenum is a ductile metal which is durable and can withstand vibrations.

Which socket is best?

Here Are The Best Socket Sets You Can Buy In 2021

  • Sunex 80-Piece Master Impact Socket Set.
  • DEWALT 192-Piece Mechanics Tool Set.
  • TEKTON 3/8-Inch Drive Socket Set.
  • GearWrench 57-Piece 3/8-Inch Drive 6-Point Socket Set.
  • Stanley 201-Piece Socket Set.
  • Stanley Black Chrome and Laser Etched 69-Piece Socket Set.

Where are Teng tools made?

Manufactured in Taiwan. Bergman &amp
Beving was founded in 1906 by engineers Arvid Bergman and Fritz Beving and has evolved over the last 100 years to become the home for successful brands. Teng Tools is one of those brands.

Who makes Gearwrench?

GEARWRENCH is a premier hand tool brand from Apex Tool Group, one of the largest hand tool manufacturers in the world.

What are 5 point sockets used for?

5-Point Sockets

These sockets fit the nuts found on water and gas valves. Use with hand-driven tools only.

What sockets are used for ARP bolts?

ARP 12-point connecting rod bolts offer much need space and help by taking off a little rod weight as well. A 6-point socket should be used on 6-point fasteners and 12-point sockets on 12-point fasteners.

What is the difference between a torque wrench and a socket wrench?

The socket is then used to fully tighten the bolt or fastener. Torque wrenches are commonly used on automobiles to precisely tighten bolts and fasteners to the manufacturer’s recommendations. Torque wrenches can be used on any bolt that needs to be tightened to a specific setting.

What’s the difference between metric and standard sockets?

SAE &amp
Metric: What’s the Difference? SAE sockets are sized in inches and fractions of inches. Metric and SAE wrenches have different systems of measurement. Metric sockets and wrenches use the metric measurement system.

How do you remove a rounded 12 point bolt?

How to remove a rounded nut or bolt- 5 different ways

What are flange bolts?

Flange bolts have a circular flange under the head that acts like a washer to distribute the load. Flange bolts that are non-serrated are sometimes called frame bolts.

What sockets do mechanics use?

⅜” drive sockets are the most practical sockets for most automotive jobs. If you can only pick one drive socket set — you want a ⅜” drive set. However, these still won’t let you complete any job. ½” drive socket sets are the largest drive sockets that most mechanics need.

Is there a 10mm socket?

In fact, the 10mm socket is one of the most commonly used metric size sockets of all. It’s no secret that the majority of parts under the hood and in the car require a 10mm. The applications may vary from car to car, but the 10mm is absolutely vital to complete a project.

What sizes do ratchets come in?


  • Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets.
  • Most operate with a geared drive
    those with a higher tooth count let you operate the tool with a smaller swinging motion, which is useful when there’s little room to move the handle.