Quick Answer

Quick Answer Can you solid axle swap a 100 series?

To do a solid axle swap you will need to cut all of the IFS stuff off and fabricate new mounts for the solid axle. You will need to build/buy a correct width axle with the diff installed.

Is a 100 series Landcruiser solid axle?

Model: 100 Series HZJ105R, five-speed manual, aftermarket turbo and top-mount intercooler. PROS: Solid axle front end: Simply rules off-road compared to IFS. On-road comfort and reliability: Great for a large 4X4.

How much does it cost for a solid axle swap?

The process generally costs around $2500-$3000, depending on how involved the engineer needs to be throughout. However, it’s a vital component to ensure the vehicle is legal and safely built.

Are solid axles stronger than ifs?

We’re showing custom aftermarket tie rods here, but most solid front axles come with tie rods much, much thicker and stronger than their IFS equivalents.

Can you convert IFS to solid axle?

Now, a solid axle swap is not exactly an easy feat. But for those with the right skill set or will to learn, it’s definitely doable. Despite the old Toyota IFS being a great system, it lacks wheel travel and articulation. That’s why this serious off-roader opted for a solid axle swap.

What is a solid axle swap?

A “solid axle swap” refers to replacing Independent Suspension with a solid or beam axle. There is still an operational differential.

What’s the difference between 100 and 105 series LandCruiser?

The biggest difference between the 100 to the 105 series Landcruiser is the engine and front axle/suspension setup. 100 series having better motor options and the 105 having a stronger &amp
solid front axle. Juha has done an engine transplant to this 105 series landcruiser and now has a Turbo diesel with solid axle!

How can you tell the difference between a 100 and 105 series LandCruiser?

The 105 series also retains the traditional Cruiser full floating rear axle shafts whereas the 100 series utilises the semi-floating rear axle design. The 2 chassis variants are distinguished by their model code which is easily found on the ID plate under the bonnet. Any model code with the suffix “100” (eg.

What is a 100 series LandCruiser?

The LandCruiser’s 100 Series is larger overall than earlier models. Weighing in at around 2.5 tonnes, it is perfect for heavy towing but is heavy on fuel unless you purchse a diesel model. The LandCruiser isn’t as roomy as its exterior dimensions suggest it should be. LandCruiser turbo-diesel engine (2000).

What does SAS mean trucks?

As a cost reduction partner, Toyota’s unique system of active stability, or SAS, focuses entirely on making operators more productive while protecting the operator, the forklift, the materials handled, and the facility.

What year was the last solid axle Hilux?

The solid front axle would remain in the 5th generation 4×4 LN106 model until 1997. Solid front axles had been present in all 4×4 Toyota models until 1986.

What is a live axle 4wd?

When the going gets tough off-road, however, a live-axle set-up has advantages over an independent design, including constant ground clearance under the axle and the fact that as one wheel is pushed upwards by an obstacle the opposing wheel is pushed downwards, giving the vehicle more chance to keep all of its wheels …

Are solid axles better for off roading?

So, when it comes down to it, an independent suspension will handle better than a solid axle, making it an ideal setup for higher speeds and smaller obstacles. But a solid axle’s traction on those big bumps and hills makes it the king of crawling.

What are the disadvantages of a solid rear axle?

-Solid axles are heavy, adding to a vehicles weight and when manufacturers go to extreme measures to make them lighter they tend to become a shadow of their former selves. These light-duty versions tend to bend and crack when those of us who push them, push them.

Can you rock crawl with ifs?

Sure, an IFS rig can be built to work in the big rocks, but cost and simplicity tend to keep the solid axle alive when it comes to rockcrawling.

Do solid axles have CV joints?

Solid axle vehicles run the CV joints within the axle housings, which negates the need for a rubber boot around the joint itself and reduces the requirement for two joints per side down to one per side – this means longer-lasting CV joints.

What is IFS on a car?

Most modern vehicles have independent front suspension (IFS). Many vehicles also have an independent rear suspension (IRS). IRS, as the name implies, has the rear wheels independently sprung. A fully independent suspension has an independent suspension on all wheels.

What vehicles have solid axles?

Even though we are now down to just three new vehicle models available with a solid front axle in the U.S.—Jeep Wrangler, Ford Super Duty, and Ram heavy-duty trucks (four if you count the über-expensive Mercedes G-class)—we’re still huge proponents of the driven beam axle construction for off-road use.

Are solid axles better?

Solid axles have less parts and therefore have less things to break out on the trails. Simplicity also means easier to fix, easier to care around spare parts that might break, etc. Yup, what everyone already said. Also, front end wheel alignments are less complicated so your tires last longer.

Do solid axles have tie rods?

On a solid-axle truck, a single tie rod connects both knuckles, keeping the tires turning congruently with each other. The tie rod is connected to both knuckles usually in front (but occasionally in back) of the axlehousing.

What’s the difference between a solid axle and independent suspension?

Independent Vs. Solid Axle

When did 100 series go to Ifs?

100 Series IFS – 1998 to 2007.

What engine is in a 100 series Landcruiser?


Series Engine Peak power
100 Series (HDJ100) 4.2-litre turbo-diesel I6 (1HD-FTE) 151kW at 3400rpm
100 Series (UZJ100) 4.7-litre petrol V8 (2UZ-FE) 170kW at 4800rpm

What is the towing capacity of a 100 series Landcruiser?

Toyota’s recently increased towing capacity of 3500 kg has been retained in the 100 Series, but for the time being, NSW owners will have to be content with the regulation 2185 kg for the GXV and 2130 kg for all other models.

What is the GVM of a 100 series Landcruiser?


38 Kerb Weight (Kg) 2356kg
39 Tare Weight (Kg) 2241kg
40 Payload (Kg) 824kg
41 Gross Vehicle Mass (Kg) 3180kg

What is a 105 Land Cruiser?

Engine-wise, the 105 Series was very much an 80 Series carry-over with both the 96kW SOHC non-turbo diesel 1HZ engine or the 165kW 1FZ-FE DOHC petrol six-cylinder available across all three trim levels.

Are 100 series Land Cruisers full time 4wd?

From the factory yes.

What engines were in the 100 series?

The three engines were 4.7-litre quad cam 32-valve V8 petrol, 4.2-litre SOHC 24-valve turbocharged and intercooled direct-injection diesel and 4.2-litre SOHC naturally aspirated diesel. All petrol and turbo-diesel models featured independent front suspension.

Does 100 series Land Cruiser have traction control?

For the 100. II and 105. II LandCruiser, standard safety equipment was extended to include dual front airbags and front seatbelt pretensioners. Beyond this, the LandCruiser GXL added ABS, while the VX and Sahara were further equipped with electronic stability control and traction control.