Quick Answer

Quick Answer: How much HP can a 12 valve handle?

Though it’s quite restrictive, the factory cast-iron 12-valve cylinder head will allow you to reach 500 hp, but that aged head gasket might not live at 35-45 psi of boost.

How do I get more power out of my 12 valve?

Double The Horsepower of Your 12 Valve Cummins | Power Driven Diesel

Why is a 12 valve better than a 24 valve?

12v vs 24v Tuning &amp
Aftermarket Potential

When it comes to serious power and performance the 12v 5.9 Cummins takes the win. These engines are known to hold up better at extreme power levels when compared to the 24v engines. P7100 injection pumps on the 6BT are easier to mod and support the extra power.

How much boost does a 12 valve Cummins make?

Its good for about 35-40 psi.. You do need to enable the WG, even thou many don’t.

How much is a 12 valve Cummins Engine worth?

A shop skilled in Cummins swaps will charge around $12,000 to $15,000 to take a 12-valve version with the 5R110.

Why is the 12v Cummins so good?

What made the Cummins so popular was the fact that its peak power and torque was insanely usable—in fact, the redline is only at 3,000 RPM! The 12-valve was able to get respectable fuel economy while producing torque figures never-before seen in an ordinary pickup truck.

What size turbo is on a 12 valve Cummins?

The stock specs for a 12-valve Holset HX35 will vary from year to year and whether the truck was a manual or auto, but the compressor inducer will be between 54 and 56mm. While popular upgrades for common rail trucks range between 64 and 67mm, a hot street 12-valve 5.9 needs to be a bit smaller.

How much HP can a stock 12 valve Cummins handle?

While the factory 12-valve rods can handle 1,000 hp, Scheid Diesel does recommend upgraded rod bolts anytime you’re in the neighborhood of 800 hp.

What is the best year for 12 valve Cummins?

1996-1998 has the best injection pumps (perhaps ignoring the 1989-1993 VE) and stronger automatics compared to earlier years. Look at the buyers guide section in the thread below. The 1998 12 valve trucks were only built in 1997.

Are 12v and 24v blocks the same?

Minor difference, but different none the less.

How long will 5.9 Cummins last?

The Cummins brand is extremely reliable and prides itself on long-lasting engines. The 5.9-liter engine can expect to churn out 300,000 to 400,000 miles.

What is the difference between a 12 valve and a 24 valve?

12V vs 24V Cummins: Which One is Better?

How much HP can a 5.9 Cummins handle?

The 5.9L inline-six mill’s factory rotating assembly from ’89 to ’02 is capable of handling 800 hp (1,400 to 1,600 lb-ft of torque) without breaking a sweat, and is often pushed into four-digit territory before aftermarket rods become a consideration.

How much boost does a 5.9 Cummins make?

On 1998.5-2004 5.9L Cummins you will need to physically modify your wastegate to gain more turbo boost. Doing this without the Boost Fooler will result in check engine lights and codes set into the computer. Stock 98-04 trucks should generate 18-23psi of boost pressure stock (depending on year model).

How much does it cost to 12 valve swap?

Going the 12-valve, 5R110 route can be pulled off for $12,000 to $15,000 at a shop that’s seasoned in Cummins swaps. Sprinkle in a little more power and the cost obviously goes up, but for a basic, 350hp (ish) 5.9L-powered ’03-’10 Super Duty you’ll get a Cummins repower that’s cleanly done and rock-solid reliable.

What Cummins Engine is best for swap?

Those looking to perform a Cummins diesel conversion often stick with the 5.9 L Cummins motor found in trucks from 1989-2007 as they feature reliability, power, fuel economy, and simplicity. Arguably, they have been proven to be the best diesel motor to swap into most any application.

What years did Dodge make the 12 valve Cummins?

1994-1998 12 Valve 5.9L Cummins Specs

The term 2nd generation Cummins refers to Dodge diesel pickups between 1994-2002. There are two variations of the 2nd gen Cummins though. 1994-1998 trucks feature 12 valves and are very similar to the previous trucks engines.

What will 4k governor springs do for my 12v Cummins?

The Industrial Injection 4000 Governor Spring Kit is by far the best modification you will ever do to your 12 valve Cummins engine. The factory governor generally will slowly start to defuel the engine around 2300-2400 rpm and drastically decrease performance and pulling power.

How reliable is a 12v Cummins?

The Cummins 12v/6BT is widely regarded as the best and most reliable diesel engine ever produced. These engines are extremely simplistic, operating with mostly mechanical components rather than complicated electronic ones. The simplicity allows for massive power potential in conjunction with ultimate reliability.

Is 12 valve or 24 valve Cummins better?

The 12 Valve engine is hands down more reliable than the 24 Valve. Even guys who have spent the money to get an aftermarket lift pump (a must with a 24 Valve, along with a fuel pressure gauge) have gone through multiple pumps.

How much HP can a HX35 support?

HX35 is good to around 300-400 hp, i turned mine in to a hybrid and it still is not enough.

How do you adjust a 12 valve Cummins?

How to tune a 12 valve Cummins

What Turbo is on a 1st gen Cummins?

Holset Fixed Geometry Turbocharger

1st Gen 5.9L Cummins Years: 1989-1993
Compression Ratio: 17.0:1
Firing Order: 1-5-3-6-2-4
Fuel Injection: Bosch VE44 Mechanical injection pump, mechanical injectors, direct-chamber fuel injection
Turbocharger: Holset Fixed Geometry Turbocharger (VGT)

How fast is a stock 12-valve Cummins?

Registered. Mine is about 120 mph.

Does a 12-valve Cummins have a computer?

All 12-Valves are non-electronic injection pump engines and DO NOT require any electronics from the truck to run.

How much horsepower does a 5.9 12 valve Cummins have?

The Cummins 5.9-liter 6BT 12 valve has 230 HP, 440 lb-ft of torque, and a P7100 inline injection pump right out of the box. The 12-valve is also a popular engine swap choice, powering a slew of Jeep, rat rod, muscle car, and dragster projects.

How much does a 5.9 12 valve Cummins weigh?

How Much Does A 12 Valve Cummins Engine Weight?

Engine: Cummins 5.9L ISB (commonly referred to as the “24 valve”)
Horsepower: 235 – 325 hp @ 2,900 RPM
Torque: 460 – 610 lb-ft @ 1,600 RPM
Governed Speed: 3,200 RPM
Engine Weight: ~ 1,150 lbs, dry & dressed

What year did Dodge stop using the 12 valve?

However, in 1997, when Dodge and Cummins were gearing up for the transition to the all-new 24-valve 5.9L ISB set to be released midway through the ’98 model year, the remaining 12-valve engines were built using the 24-valve’s block and crankshaft.