Quick Answer

Quick Answer How much weight can Load Range E tires carry?

The Load Range C BFGoodrich tire (manufactured by Michelin) is rated at 2,470 at 50 psi and weighs 44 pounds, while the same tire in Load Range E is rated at 3,195 pounds at 80 psi and weighs 52 pounds.Common Light Truck (LT) Load Ranges.

Load Range Max Load Pressure (psi)
D 65
E 80
F 95

Are Load Range E tires good?

Besides, E indicates one of the highest load ranges available on the market. Therefore, if you are going to carry heavy loads with your truck, you might want to get this highly rated tire.

Is Load Range E or F better?

F-load range tires allow for higher carrying capacity at a higher inflation pressure compared to tires of the same size with an E-load range.

What is Load Range E on tires?

The load range is identified by a letter of the alphabet, usually from A to F, which represents the ply rating and load pressure. A rating of “E” on the tire means the tire has a ply rating 10 and a load pressure of 80 psi.

How many ply are E rated tires?

For example, an “E” load range indicates that a tire is equivalent to a 10-ply construction tire.

Do I need 10 ply tires?

Understanding the tire ply rating system helps you understand how your tires support the weight of your vehicle (called load range or load index). If you drive a ¾ ton, one ton or even larger pickup or SUV (or haul a trailer) then you require 10-ply tires.

Do load range F tires ride rough?

Typically, an F rated tire will ride a bit worse than an E rated tire, but there are some exceptions. Load range refers generally to a side ply rating, while load index refers to a tire’s weight rating.

What truck tires last the longest?

The longest lasting tires in Consumer Reports’ tests are the Pirelli P4 Four Seasons Plus. They claim 90,000 miles, and Consumer Reports estimates they’ll go 100,000.

Is 10 ply or 12 ply better?

A tire ply rating is an expression of the tire’s strength and capacity. The ply rating translates in a very direct way to tire capabilities and limitations, especially when it comes to inflation and load capacity.What’s a tire ply rating?

B 4 ply
C 6 ply
D 8 ply
E 10 ply
F 12 ply

What is the difference between load e and load E tires?

Expert Reply: The difference between a load range E and load range F tire of the same size, 235/85-16, is the weight capacity and pressure. The Karrier Radial Tire, Load Range E, # AM10295, has a capacity of 3,640 pounds at 95 psi. The Load Range F Tire, # AM10501, has a capacity of 3,960 pounds at 95 psi.

What is a 12 ply tire?

The 12-ply rating doesn’t actually mean that the tire has 12 different plies or 12 layers. It’s really just the way to classify the tire and to ensure that the manufacturer tested it to meet that 12-ply rating and/or that Load Range F requirement.

What load rating do I need?

To roughly determine the load range capacity for each individual tire, take the vehicle’s gross weight and divide by four. If the vehicle gross weight is 4,500 pounds, each tire should be able to safely support at least 1,125 pounds.

What load index is Load Range E?

Light Truck Tires

LT-Metric, LT-Flotation and LT-Numeric Light Truck Tires
Load Range Ply Rating Abbreviated
D 8 D
E 10 E
F 12 F

How do I know if my tires are 10 ply?

You’ll find the information about a tire’s Ply Rating on the tire’s sidewall.

Why is 10 ply an insult?

But long before I figured out that Wayne’s pet insult “10-ply” refers to someone who’s soft, or could follow more than a fraction of what the hockey players or the skids (breakdancing meth-heads, led by Tyler Johnston’s melodramatic Stewart) were saying, I recognized that Letterkenny spoke in the only dialect I needed …

Is a higher ply tire better?

The more ply, the more sidewall strength. When your sidewall isn’t strong enough, the load squashes the tires down into the road. The tread then pushes into the ground and spreads out in a way that was never intended by the manufacturer, leading to a blowout.

Does a 1/2 ton truck need 10 ply tires?

A 10 ply is a load range e tire and those on a 1/2 ton will rattle your teeth loose. I would suggest a load range c tire for a truck or van. They ride nice and wear more even than the p tires your truck came with and handle in corners very nice with no tire roll.

What load range is XL?

@ 42 PSI

Load Range and Ply Rating
Load Range Ply Rating Max Load Carrying Air Pressure
Standard Load (SL) 4 @ 36 PSI
Extra Load (XL) 4 @ 42 PSI
C1 6 @ 50 PSI

What does LT mean on a tire?

If a tire size reads, LT235/75R15 104/101S, the LT indicates that this tire is meant for Light Truck use. These tires are made for light-duty and heavy-duty pickup trucks (typically ½ ton, ¾ ton, or 1-ton load capacity), SUVs and vans.

Where do Falken tires come from?

Falken Tires was launched in its native country of Japan in 1983 and introduced to the North American market two years later. At its inception, Falken was created as the flagship high performance radial brand under Ohtsu Tire and Rubber.

Where are Toyo tires made?

Service, style, and really great tires

Many of these tires are built here in the United States at our state-of-the-art factory in Bartow County, Georgia.

How many miles should I get from a set of tires?

Your tires should last 50,000 to 60,000 miles on average. But that really depends on the manufacturer. Some manufacturers build their tires to last up to 80,000 miles, while some design their tires to last as little as 30,000 miles. You can see how many miles to expect out of a tire by checking its treadwear rating.

What does 115T mean on a tire?

The 115T signifies that the tire has a 4ply standard load sidewall. The 121S signifies a 10 ply load range E sidewall. The standard load tire is best for a half ton truck, whereas the load range E sidewall is best for a 3/4 and 1 ton truck. Thanks, BWT.

What’s the difference between 14-ply and 16 ply tires?

Truck tires typically come in two load ratings: G and H. Load range G is a 14-ply configuration, while load range H tires have 16 plies. The heavier-rated tire will usually add between 700 pounds and 1,000 pounds more load-bearing capacity per tire (see “How Much is Too Much,” next page).

What is the difference between 14-ply and 16 ply?

Therefore, a 16-ply tire had 16 actual plies of cotton cord, while a 14-ply tire only had 12 plies of cord. This enabled the 16-ply tire to be run at a higher PSI and thus carry more weight. Of course tires are no longer made with cotton cord. Modern truck tires only have one casing ply of steel.