Quick Answer

Quick Answer What are 12 point sockets used for?

The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.

What are 12 point sockets called?

A 12-point end is a double-hexagon (sometimes called “double-hex”)—it has 12 points, or vertices, evenly spaced at 30 degree increments around a circle. This geometry will also fit on a 6-point fastener.

Can I use a 6-point socket on a 12 point nut?

Six-Point Sockets vs. Twelve-Point Sockets

Both 6-point and 12-point sockets can be fitted on hex nuts, the primary differences being convenience and torque. The more points a socket has, the more points of contact available.

Are 12 point sockets necessary?

Is this really necessary? Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners.

Will a 12 point socket work on a Torx bolt?

A 10 mm 12 point socket will not slip over the star and a 12 point 11 mm socket spins and will not grab. The special star bolt needs a star socket. Another way to explain it is that the head of the bolt is shaped like a 12 pointed TORX wrench. I need a 12 pointed TORX socket.

What are 8 point sockets used for?

Proto® 8 Point Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials.

What is the difference between a 6 point and 12 point socket?

A six-point socket is of hexagonal shape. It has six vertices or points, and they have an even space between them, which is 60° angle. On the other hand, a 12 point socket is double hexagon-shaped, including 12 vertices or points. However, the increment space around the circle here is 30° each.

Where are Teng tools made?

Manufactured in Taiwan. Bergman &amp
Beving was founded in 1906 by engineers Arvid Bergman and Fritz Beving and has evolved over the last 100 years to become the home for successful brands. Teng Tools is one of those brands.

What is a 12 point box wrench?

In wrench. Box-end wrenches have ends that enclose the nut and have 6, 8, 12, or 16 points inside the head. A wrench with 12 points is used on either a hexagonal or a square nut
the 8- and 16-point wrenches are used on square members.

Are impact sockets stronger than regular sockets?

Impact sockets can be used safely on a hand tool, however you should never use a regular hand tool socket on an impact wrench as this can be extremely dangerous. A regular socket is likely to shatter when used on power tools due to their thinner wall design and the material they’re made from.

What is the most common socket drive size?

⅜-inch drive size sockets are the most common and most available.

Are impact sockets different than regular sockets?

The difference in color also helps you to quickly distinguish impact sockets from standard sockets in a tool box. Regular sockets are typically made of chrome vanadium whereas a good impact socket is made from chrome molybdenum. Chrome molybdenum is a ductile metal which is durable and can withstand vibrations.

Do mechanics use 12 point sockets?

Do you need 12 point sockets

Who makes Gearwrench?

GEARWRENCH is a premier hand tool brand from Apex Tool Group, one of the largest hand tool manufacturers in the world.

What are 5 point sockets used for?

5-Point Sockets

These sockets fit the nuts found on water and gas valves. Use with hand-driven tools only.

Can you use regular sockets for Torx?

No – dont use ordinary sockets. Yes use a Torx socket. Well it was DIY… I’m not familiar with this sub-forum.

Why is the 12 point box wrench more common than the 6 point?

4 Answers. They sell 12-point sockets for two reasons: 1) because 12-point socket engage with the bolt head every 30° instead of every 60° so if you’re in a tight spot you don’t have to turn the socket or ratchet handle as much. 2) Because then you’ll go out and buy 6-point sockets.

What size is e14 Torx?

For use with External TORX Head Type Bolts.

Socket E-Size Inch Metric
E-10 .36″ 9.3mm
E-12 .43″ 11.1mm
E-14 .50″ 12.8mm
E-16 .57″ 14.7mm

Can an 8 point socket be used on square drive heads?

What is an 8 point socket used for? Our range of 8 point sockets are perfect for use on our range of Pyramid Head Door Screws, Lag Bolts and Square Headed Machine Bolts. 8 point sockets take away the need for the use of a shifter and will stop you rounding off the head of a square bolt.

Will an 8 point socket fit a square nut?

8 point for squares can take off corners. Most all impact wrench sockets are 6 or 4 point.

What are star sockets used for?

External star sockets are designed for mechanics to replace and remove Torx-type fasteners in motorcycles and other vehicles with ease! Each socket is constructed to withstand the high-force of impact drivers and coated to resist rust. A great set of star sockets to replace Torx fasteners and get you back on the road!

What kind of socket do you use on a square nut?

13mm Square Head Socket

Sockets for square head bolts and Square Nuts. Bolts and screws are classified by their shank or shaft size. Sockets for square head bolts and Square Nuts.

How do I know what size wrench I need?

Multiply the first number which is the bolt size in inches or millimeters, by 1.5 using a pocket calculator, if necessary. For example, for the numbers in Step 1, 1/2 x 1.5 = . 75 or 3/4, which is the wrench size needed for this standard-sized bolt.

Where are Bergen tools made?

I’ve worked in Germany using German tools and never come across anything called ‘Bergen’ – never come across them in the UK either for that matter. I think they are just using a German-sounding name (it means ‘mountains’) and you’ll probably find they are made somewhere in China or Taiwan.

Are Teng Tools worth it?

The sockets are high quality although they are not chromed they have a nice matte finish that is different than most tools. I would recommend this tool set to anyone looking for a good medium grade tool set. It is well designed and well packaged.

Are Teng sockets any good?

Teng Tools are reputed to be good as are Kamasa. I have a few Teng tools and a 3/8″ drive set. It is very well made and strong and the ratchets are very good. The only problem is that the sockets show signs of some corrosion – and I take care of my tools.

Why are a box end wrench called?

Box end. A box, or closed, end wrench is used where there is room to place the wrench mouth around the fastener. Box end wrenches are available in 6- and 12-point versions to match the number of sides on the fastener.