Quick Answer

Quick Answer: What is a 12 point bit called?

This special 12-point size is also called Triple-Square or “XZN”. Recessed hole in center of hit allows engagement of “Tamperproof” fasteners.

What size is M12 Triple Square?

Enhance your purchase

Brand Capri Tools
Item Dimensions LxWxH 5.4 x 0.86 x 0.86 inches
Size 12mm (M12) Long
Material Chrome Vanadium Steel, S2 Steel
Drive System Triple Square

What is the size of a triple square bit?

We include all 9 known sizes of triple square bit (M4, M5, M6, M8, M10, M12, M14, M16 and M18) PLUS an extra long M10 for inner CV bolt access.

Are triple square and Torx the same?

Torx comes in the start-like shape, while the Triple Square has three squares at all 90-degree angles. Trox use for motorcycles, vehicles, computer systems, and bicycles. At the same time, Torx only uses for vehicles. They are not the same
read the below content and found their differences.

What is a 12 point bolt?

12-Point Bolts are an alternative head design for hex socket cap screws. The flange diameter and head height are designed to fit a range of applications and counterbored holes designed for standard hex socket cap screws.

Will a 12 point socket work on a Torx bolt?

A 10 mm 12 point socket will not slip over the star and a 12 point 11 mm socket spins and will not grab. The special star bolt needs a star socket. Another way to explain it is that the head of the bolt is shaped like a 12 pointed TORX wrench. I need a 12 pointed TORX socket.

What is triple square socket?

The triple square, also known as XZN, is a type of screw drive with 12 equally spaced tips, each with a 90 degree angle. Its name derives from overlaying 3 equal squares to form such a pattern with 12 right-angled tips. Common sizes are 6, 8, 10, and 12 mm.

Is spline socket same as Triple Square?

Super Moderator. XZN and triple square are the same thing,if you try and use a Torx bit to remove these you’ll almost certainly damage the head of it,as not only are there a different number of splines,they’re also at a different angle to Torx bits. Chris.

How do you remove a stripped triple square bolt?

2 Answers

  1. Using an angle grinder (very gradually) to grind off two sides (four sides if you’re good) to get a spanner/wrench around the head of the bolt.
  2. Heat the bolt (then let it cool) before attempting to undo it with the spanner to break the lock-tite.

Is XZN Triple Square?

XZN/Triple Square fasteners are mostly common on Cylinder head bolts, Retaining Bolts, Drive train components, Door hardware, Disc brake calipers, and other applications. Crafted and Designed with superior materials for increased torque and unmatched hardness.

Where are 12pt bolts used?

Typically, a 12-point bolt would be seen in the oil and gas industry because of the recessing head of the bolt. This will not be seen when they’re clamping together the end bolts. 12-point bolts are also prevalent in engine applications.

Are 12 point bolts better?

Because the 12-point bolt heads or nuts are smaller, they will fit in smaller places, like close to a header pipe. Bolts or stud nuts on cylinder heads where large valve springs are used, space can be limited and the 12-point fasteners may provide a better fit.

Can I use a 12 point socket on a 6 point nut?

Compared with the 6-point socket, a 12-point socket has twice as many points, so it can more easily slide onto a hex nut. In other words, you would need to rotate only up to 30 degrees to fit a 12-point socket onto a hex nut.

What is the advantage of a 12 point socket?

The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.

Which is better a 6-point or 12 point socket?

Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners. Here’s why: (1) Six-point sockets have thicker walls, so they’re less likely to flew.

Will a 12 point work 6 points?

A 12-point end is a double-hexagon (sometimes called “double-hex”)—it has 12 points, or vertices, evenly spaced at 30 degree increments around a circle. This geometry will also fit on a 6-point fastener.

How do you measure a triple square?

BIG differences between (triple square) (star) bits and (hex) bits

What is a triple square screwdriver?

The triple-square, also known as XZN, is a type of screw drive with 12 equally spaced protrusions, each ending in a 90° internal angle. The name derives from overlaying three equal squares to form such a pattern with 12 right-angled protrusions (a 12-pointed star).

What is a triple square bolt head?

Triple square, also known as XZN, is a type of screw drive with 12 equally spaced tips, each with a 90 degree angle. Its name derives from overlaying 3 equal squares to form such a pattern with 12 right-angled tips. Displaying 1 to 5 (of 5 products) Product Image.

How many points is a spline socket?

A spline socket is designed to tighten and un-tighten spline fasteners but is also ideal for use on 4-point, 6-point (hex) and 12-point (bi-hex) fasteners, making them a useful socket to use across multiple shaped fasteners.

What is a spline bit?

The Spline shank bits are carbide-tipped bits used for drilling holes in concrete, brick or block base material. The tip of the bit is made out of carbide. The Spline drive carbide-tipped bits are used in electro-pneumatic hammer drills.

What does XZN stand for?

Abbreviation xzn

XZN: Meaning
XZN Triple square screw driver

How do you remove a rusted square bolt?

Try a 6-point wrench or socket on your seized nut/bolt. Start by rocking the bolt by tightening then loosing, this may be all you need to break through the rust. Try and avoid 12-point wrenches and sockets as they likely to slip and strip the bolt head.

How do you remove a rounded off spline bolt?

How to Remove a Stuck Bolt , Rounded Torx ( Stripped Rusted …