The PerformaBuilt Hydramatic 400 Racing Transmission is a mega-performance transmission capable of +1000 RWHP.
Can a 4L80E handle 1000HP?
Our PERFORMANCE 4L80E series is ideal for street/strip driving and upgrades from a 4L60E/4L65E platform. It’s rated at 1000 RWHP….
What transmission can handle 500HP?
supports up to 500HP. Our Performance Hydramatic 350 Transmission (Auto) is built to take a beating. It’s rated at 500 RWHP…
Can a 4L60E handle 1000HP?
supports up to +1000HP.
How much HP can a 4l60 handle?
Their Stage 2 Pro Race transmission can handle gobs of power while their Invincible Black Edition 4L60E trans can support over 1,000 ponies.
How much HP can 4L80E handle?
In short, Performance Automatic yields a 4L80E engineered to handle 700+ horsepower and comparable torque.
How much HP can TH350 handle?
The Stage 1 TH350 is rated up to 450 hp. Those seeking something a little stronger can check out the Stage 2 version (PN PA35102) that holds 550 hp and retails for $1,500 with a real world street price of $1,175 from most vendors. Both transmissions come with a standard one-year warranty.
Which is better 4L80 or 6l80?
The 4L80E is more proven because it has been around much longer and more parts are available for it, but the 6L80E has come a long way and they can handle tons of power with a few basic upgrades.”
How much does a 4L80 cost?
The 4L60E is far more abundant in the junkyard and therefore cheaper. A local transmission shop will rebuild a 4L60E for around $900 to $1,200 and a 4L80E for $1,300 to $1,800, with used units going for about $400 and $600 to $1,000, respectively.
How much HP can a 727 handle?
The 727 is a relatively simple piece when compared to other automatic transmissions, and its strength is a function of that simplicity. We’ve put stock TorqueFlite transmissions behind big-blocks pushing upwards of 600 hp and found they not only survive, but perform quite well.
Can a 4L60E handle 500hp?
We found a used 4L60E out of a small-block Chevy-powered 1999 van for $200 and decided on a budget upgrade to handle roughly 500 hp. This decision was shaped by the knowledge there are lots of performance upgrade parts from Sonnax and TCI Automotive.
Does a transmission add horsepower?
It does not increase horsepower to the wheels. Instead you are able to shorten the gears (via an FC gearbox) thus reducing resistance placed on the motor. You’re not increasing efficiency or horsepower by changing gear ratios.
How much horsepower can a 700R4 take?
The Street/Strip 700R4 is good for about 550 hp maximum, but with the HD input drum it is good for about 625 hp max.
How much HP can a 4L70E handle?
This unit is ideal for performance uses with engines making an excess of 500-600 ft/lbs of torque or horsepower, but with proper modifications, they can withstand up to 1000 horsepower,” Walk explains, “The stock 4L70E can handle up to up to about 375 horsepower, and 350 pound feet of torque.
How can you tell the difference between a 4L60E and a 4L80E?
Appearance. The 4L80E can be told apart from the 4L60E by looking at their transmission fluid pan. This is because the 4L80E has a pan that is oval in shape whereas a rectangular pan is featured by the 4L60E. Another disparity between both devices is the number of bolts used to secure the transmission to the engine.
Can you make a 4L60E stronger?
You can also upgrade your 4L60E to a high-volume 13-element (vane) pump which will handle pressure and volume. Inspect Transmission soft and hard parts. There’s also a need to inspect and upgrade the transmission’s soft and hard parts as the case may be.
Will a 4L60E hold up to a 454?
Re: OK, I have read !! 4L65E will take a 454
In the long run a 700R4/4L60 or 4L60E/4L65E/4L70E transmission will not hold up behind a big block, Or atleast not a good running one . You can build them to take power, Its the low-end grunt from a BBC &
a heavy truck with big tires that WILL kill it.
Can you put 6.0 on 4L60E?
A well built 4L60E can EASILY handle a cam/heads 6.0L… Where a stock 4L80E will handle it. All 6.0L LQ9 &
LQ4 that were installed in 1/2 ton chassis had either a 4L60E or 4L65E. A well built 4L60E can EASILY handle a cam/heads 6.0L…
What is the strongest GM transmission?
The 10L90E is by far the biggest and heaviest modern automatic transmission in GM history, but it’s also the strongest and offers amazing performance and economy when matched with a Gen V LT engine.
Can you replace a 4l60 with a 4L80?
Upgrading from the 4L60E to the 4L80E is akin to going from a Dana 44 axle to a Dana 60–you’ll add some weight, but also add durability. According to GM Powertrain information, the 4L60E has a maximum engine torque rating of 360 lb-ft and a maximum gearbox torque rating of 610 lb-ft.
Can a Turbo 350 handle 1000hp?
Can a Turbo 350 handle 1000hp? The TH350 can “hold” 1000 HP but it will be a more maintenance intensive unit that a TH400 or Glide.
How much horsepower can a Turbo 400 hold?
About 400-450 HP/TQ is the limit on the stock TH400. With ONE almost free modification and some minor valve body calibration changes, 800 HP on an otherwise stock TH400 is not a problem if it’s assembled well (good endplay, etc), and the 34 element sprag is a wise addition above 450 HP or any drag usage.
Which transmission is better TH350 or TH400?
The Turbo 350 (top) and the Turbo 400 (bottom) are the quintessential GM automatic transmissions. Both are three-speeds, but the Turbo 400 is physically larger and designed more for the torque capacity of big-block engines.
How much HP can a built 6L80 handle?
6L80 (6L80e) Level 2 Rebuild Kit rated up to 550 RWHP.
Is 6L80 a good transmission?
The 6L80 is doubtless a very successful OEM transmission, and a terrific conversion transmission in the right Jeeps and situations. However, it is a long transmission and is not compatible with short-wheelbase Jeeps such as the CJ5.
How long does a 6L80 last?
A rebuilt 6L80E transmission will only have a certain number of components that get replaced. So the service life is limited, and the warranty will only last 1-2 years. A used 6L80E transmission is pulled from a wrecked vehicle, so there’s no telling what may be wrong with it, or how long it will last.
What vehicles have a 4L80E transmission?
4L80-Es were optioned only in Chevrolet/GMC pickups, vans, and commercial vehicles, and the Hummer H1. It was also adopted by Rolls Royce in 1991 and modified after extensive testing, and used initially in the Bentley Continental R, and subsequently other Rolls Royce and Bentley vehicles.
What is needed for 4L80E swap?
In almost every case, you will need to build (or buy) a new transmission crossmember, a new torque converter, a set of transmission lines, a modified or swap harness, and a modified driveshaft with a larger yoke and crossover U-joint.
What does 4L80E stand for?
The term 4L80E denotes 4-Speed (4), Longitudinally mounted (L), 8000 lbs. vehicle weights for (80), and electronically controlled transmission (E). The ‘E’ means it requires an Electronic Control Unit (ECU) for control and firmness to enable its functionality.