Quick Answer

Quick Answer: What transmission is in a 12 valve Cummins?

What is the difference between a 47RE and a 47RH transmission?

The fundamental difference between the 47RH and 47RE is in the governor pressure control. Both units rely on a hydraulic valve body and electronically controlled overdrive unit. However, the governor pressure on the “RH” is hydraulically controlled, while the governor pressure on the “RE” is electronically controlled.

What transmission is in a 5.9 Cummins?

BD Performance 47RE Transmission 00-02 5.9L 24V Cummins.

How much horsepower can a 12 valve Cummins handle?

The forged-steel connecting rods found in the 12-valve 5.9L (and ‘98.5-’02 24-valve engines) are of an I-beam design and capable of easily handling 800 rwhp in stock form.

What is the best year for 12 valve Cummins?

1996-1998 has the best injection pumps (perhaps ignoring the 1989-1993 VE) and stronger automatics compared to earlier years. Look at the buyers guide section in the thread below. The 1998 12 valve trucks were only built in 1997.

How much is a 12 valve Cummins engine worth?

A shop skilled in Cummins swaps will charge around $12,000 to $15,000 to take a 12-valve version with the 5R110.

What years did Dodge use the 47RH transmission?

Second only in strength to 300M steel. 47RH: A hydraulically controlled four-speed automatic transmission found in ’94 to ’95 Dodge trucks.

Is the 47RH a good transmission?

The 47RH is a solid piece, and that reliability extends to the later 47RE and 48RE models found in ’96-’07 Dodges. With a factory power rating of 160 hp and 400 lb-ft of torque, the Dodge four-speeds have to be fairly strong, not for the horsepower rating, but rather the torque.

How much horsepower can a 47RE handle?

A stock 47RE will only safely handle 100psi of fluid pressure, while a Racing Valve body from Power Driven Diesel can handle 225 to 250psi, and thus more than 1,200 horsepower output.

Will a Allison transmission bolt to a 5.9 Cummins?

ATS Diesel Performance is now offering a complete kit so that our Allison 6 Speed Automatic transmission can be installed behind the Cummins 5.9L and 6.7L Engine.

How many miles will a 5.9 Cummins last?

The Cummins brand is extremely reliable and prides itself on long-lasting engines. The 5.9-liter engine can expect to churn out 300,000 to 400,000 miles.

How much is a 1st Gen Cummins worth?

avg price around here is 3500-5500. thats for a decent first gen that needs some work, like exterior or interior.

How fast is a stock 12-valve Cummins?

Registered. Mine is about 120 mph.

Are 12-valve Cummins reliable?

The Cummins 12v/6BT is widely regarded as the best and most reliable diesel engine ever produced. These engines are extremely simplistic, operating with mostly mechanical components rather than complicated electronic ones. The simplicity allows for massive power potential in conjunction with ultimate reliability.

Is 12-valve or 24 valve Cummins better?

12v vs 24v Tuning &amp
Aftermarket Potential

When it comes to serious power and performance the 12v 5.9 Cummins takes the win. These engines are known to hold up better at extreme power levels when compared to the 24v engines. P7100 injection pumps on the 6BT are easier to mod and support the extra power.

How much horsepower does a 5.9 12 valve Cummins have?

The Cummins 5.9-liter 6BT 12 valve has 230 HP, 440 lb-ft of torque, and a P7100 inline injection pump right out of the box. The 12-valve is also a popular engine swap choice, powering a slew of Jeep, rat rod, muscle car, and dragster projects.

Why are 12v Cummins so good?

What made the Cummins so popular was the fact that its peak power and torque was insanely usable—in fact, the redline is only at 3,000 RPM! The 12-valve was able to get respectable fuel economy while producing torque figures never-before seen in an ordinary pickup truck.

What year did Dodge stop using the 12 valve?

However, in 1997, when Dodge and Cummins were gearing up for the transition to the all-new 24-valve 5.9L ISB set to be released midway through the ’98 model year, the remaining 12-valve engines were built using the 24-valve’s block and crankshaft.

How much does it cost to 12 valve swap?

Going the 12-valve, 5R110 route can be pulled off for $12,000 to $15,000 at a shop that’s seasoned in Cummins swaps. Sprinkle in a little more power and the cost obviously goes up, but for a basic, 350hp (ish) 5.9L-powered ’03-’10 Super Duty you’ll get a Cummins repower that’s cleanly done and rock-solid reliable.

What years did Dodge make the 12 valve Cummins?

1994-1998 12 Valve 5.9L Cummins Specs

The term 2nd generation Cummins refers to Dodge diesel pickups between 1994-2002. There are two variations of the 2nd gen Cummins though. 1994-1998 trucks feature 12 valves and are very similar to the previous trucks engines.

What Cummins Engine is best for swap?

Those looking to perform a Cummins diesel conversion often stick with the 5.9 L Cummins motor found in trucks from 1989-2007 as they feature reliability, power, fuel economy, and simplicity. Arguably, they have been proven to be the best diesel motor to swap into most any application.

Why do Dodge transmissions fail?

However, the most common cause of failure in Dodge transmissions is a malfunctioning torque converter. Torque converters that are not functioning properly can cause shifting problems.

Is the 68RFE a good transmission?

The 68RFE is a well-designed and strong transmission with gear splits suited to the normal load-moving tasks faced by heavy-duty Ram diesel pickups. But it’s not strong enough to handle the high-output Cummins if one is towing at or near the maximum rating of a Ram 3500 day in and day out.

How do I know if I have a NV4500?

How do I know if I have a NV4500?

  1. TRANSMISSION IDENTIFICATION. The NV4500 transmission identification tag is attached to the shifter top cover.
  2. GM 4WD NV4500 (1993-94) During the first two years of the NV4500, Chevy offered this 5 speed with a 6.34:1.
  3. GM 4WD NV4500 (1995)
  4. GM 4WD NV4500 (1996 & Newer)

Do Ram trucks have transmission problems?

One of the many issues reported with the Ram 1500 onwards was transmission reliability issues. There are numerous issues, from jerky shifts to missing gears altogether. That is one terrifying issue, especially if you are looking for a truck for work.

What brand transmission does Dodge use?

What brand transmission does Dodge use?

Chrysler RFE transmission
Overview
Manufacturer Chrysler Corporation
Also called 45RFE/545RFE 68RFE 65RFE/66RFE
Production 1999-present

How strong is the Allison 1000?

Initially the Allison 1000 was a 5 speed transmission, rated to handle up to 620 lb⋅ft (840 N⋅m) of torque. This rating has increased as the transmission was updated several times, to stand at 765 lb⋅ft (1,037 N⋅m) by 2011 in GM truck applications.