Quick Answer

You Asked Can you pull a car with a come-along?

As was mentioned, you will have to keep stopping occasionally because the comealongs don’t have enough distance built in them to move the car all the way in one pull. Just stop, block the tires, release the comealong, pull the cable to it’s maximum, and shorten the chain.

What’s the difference between a winch and a come-along?

Come alongs are used primarily the same way winches are used and for similar tasks. The difference is that winches are electrically or hydraulically operated, whereas come alongs are hand-powered. Always ensure proper precaution is taken to not overload the cable or chain.

How far can a come-along pull?

A standard come along usually has only about a 7- to 10-foot pull length. That means your anchor point needs to be relatively close to your towing object, or another length of strap or cable will be necessary.

How much do come alongs cost?

Compare Similar Winches

current product Top Rated
Steel Core Maasdam
4-Ton Come-Along Cable Puller Hand Winch with Single or Double Hook Assembly 2,000 lb. 1-Ton Capacity 12 ft. Max Lift 15:1 Leverage Winch Puller Come Along Tool with 12 ft. of Cable Included
$2999 $2998
(58) (137)

Can you use a come along?

How to Use a Come Along

Can you pull a car with a hand winch?

A hand winch strap with safety hook # DL24249 is worthwhile to get because it has a breaking strength of 4,000 pounds. An extra piece of mind when you are pulling your car up an incline. A hand brake is perfect for manually-controlled load releases.

Can you lift with a come along?

Come-alongs are not rated for overhead lifting, but a similar-looking device called a ratchet lever hoist is used this way. The original tool of this type was developed by Abraham Maasdam of Deep Creek, Colorado, about 1919, and later commercialized by his son, Felber Maasdam, about 1946.

Is a cable puller the same as a come along?

A come along (also called a wire rope hand ratchet puller) is a manual device that can make moving heavy loads by hand possible. How does it work? A wire rope puller operates very similarly to a lever block except with wire rope instead of chain.

What do you use a come along for?

A come-along, or hand winch is one of the most common tools used for installing shade sails. A come-along is comprised of a body and lever arm. The body contains a fixed end and a running end. All movement comes from the running end.

How much cable is on a come along?

Tell a Friend

Product: Come-Along
Approx Weight Each : 7.63 lbs.
Cable Length: 12 ft.
Cable Lift: 12 ft.
Cable Diameter: 3/16″

How much does a come along weigh?

Technical Details

Manufacturer ‎JABETC
Item Weight ‎13.9 pounds
Package Dimensions ‎27.99 x 5.59 x 4.41 inches
Is Discontinued By Manufacturer ‎No
Manufacturer Part Number ‎Na

How does a chain come along work?

Come Along Tool Basic

What is a Tifor?

One of Tractel®‘s signature products, the tirfor®, is known worldwide as THE top tier wire rope hoist, capable of working in any position and over any height of lift with unlimited rope length. The tirfor® is safe, reliable and efficient.

What is a winch used for?

A winch is intended to be used with the pulling vehicle or anchor stationary as part of a static pull. Unspooling winch line to a stuck vehicle, throwing the unstuck vehicle in reverse and giving a yank (kinetic pull) on the stuck rig is very hard on the winches brake and drivetrain.

What is a concrete come-along?

A concrete come along rake allows you to push and pull concrete into place without stopping. Tool is lightweight but thick enough to stay rigid during use. Features a long handle so you can level the concrete effectively from a distance.

How do you unlock a come-along?

Releasing Tension on a Harbor Freight Come-Along | Quick Tip

How do you use a come-along fence?

Push the back of a fence clamp downward to open the pinchers and insert the wire into it, leaving enough excess to secure it to the post later. Push the back of the clamp upward to hold the wire securely in place. Then place the metal loop on the other end of the clamp onto the metal hook on the come-along.

How do you use a Comealong to pull up a tree?

Attach one end of a come-along to a stationary object within 25 feet — the usual length of come-along cables — of the root. One possibility is to wrap a chain around a tree and attach the come-along to the chain. Another is to position your car near the root and attach the come-along to the tow hitch.

Can you use a come-along to get a truck unstuck?

Often, a good old-fashioned yank will do the trick, whether it’s from another off-roader who’s taken pity on you, a winch, or a come-along. Sometimes, digging or jacking is necessary.

How do you use a come-along to get a car on a trailer?

PAIN IN THE ASS – Loading a car trailer with a come-along

How big of a winch Do I need to pull a car on a trailer?

Because of this, etrailer.com recommends purchasing a winch with a line pull capacity at least 50% greater than the GVW (Gross Vehicle Weight). Note: Most trucks and SUVs will require a winch with a capacity around 6,000 lbs.

Can chain blocks be used horizontally?

Chain blocks are designed for lifting loads vertically and should not be used for horizontal or angle hoisting.

What is the difference between lever block and chain block?

Put it in simple words, a Chain Block is a lifting device operated by pulling a hand chain. A Lever Block is a lifting device operated by rotation of a handle/ lever.

How do you use a manual hand winch?

Turn the crank handle or push and pull the winch lever to tighten the cable. Continue working the crank or lever to pull the object you want to move. Stop working the winch when the object has been moved into the desired position. Release the tension on the winch cable.

What is cable puller?

A cable puller, aka cable tugger, is used to pull cable through a conduit. Rope, which is lighter and more flexible than cable, is manually pulled through the conduit, then tied to one end of the cable being pulled. With one person guiding the cable, the electric cable puller does all of the hard work.

Can I use a chain hoist to pull horizontally?

While a hand chain hoist is a great option for vertical and angular lifting, they are not suitable for horizontal pulling.

What is the difference between a chain fall and a chain hoist?

A manual chain hoist which looks like a metal block is called a chain block. Chain fall’s are also referred to as Chain hoists. You will most likely hear all three of these terms in the lifting industry.