|Ford 10R80 · 10R140 GM 10L80/10L90 · Allison 10L1000|
|Manufacturer||Ford · General Motors|
|Body and chassis|
What is 10R140?
The 10R140 transmission is a ten speed automatic transmission developed by Ford and replaces the 6R140 in the TorqShift transmission series. The 10R140 transmission was first developed for 2020 models and is featured on 6.2 Ltr gas, 6.7 Ltr diesel, and 7.3 Ltr gas F-250, F-350, F-450, and F-550 Super Duty trucks.
What year did f350 get 10-speed transmission?
Ford’s TorqShift 10 replaces the previous 6R140 6 speed automatic transmission that has been standard since the inception of the 6.7L Power Stroke diesel for the 2011 model year Super Duty.Ford TorqShift 10 Speed Ratios.
|9th||0.687 : 1|
|10th||0.632 : 1|
|R||4.695 : 1|
Will Allison transmission bolt to 6.0 Powerstroke?
Allisons have been used behind the 6.0 powerstroke in the F650s so it is possible. Here is a link to the 2007 build guide. Note its the 5 spd allison.
How much HP can a 10R80 handle?
Built Ford Coyote 6R80 and 10R80 automatic transmissions can take 1,000 hp.
How much HP can a 10l80 handle?
GM Hydra-Matic 10L80 10-Speed Automatic Transmission
|2018 Chevrolet Tahoe RST||10L90||420|
How many clutch latch valves does the 10R140 main control have?
The 10R140 has ten forward speeds, one reverse speed, four planetary gear sets, one mechanical One-Way Clutch or OWC, six friction clutches, an upper valve body, a lower valve body with eight solenoids, and PCM or TCM controlled electronics. The 10R140 utilizes six shift (A-F) linear solenoids.
Who makes Torqshift transmission?
To ensure reliable performance, the Ford Torqshift transmission has been built to rigorous Built Ford Tough® standards. That means torture-testing at maximum engine torque for thousands of hours on end, plus cold-weather testing down to -40°F.
What transmission does a 2021 f350 have?
The F-250 and F-350 come standard with a gasoline 6.2-liter V-8 that makes 385 horsepower and 430 lb-ft of torque. While a six-speed automatic is the base transmission, most Super Duties feature a 10-speed automatic gearbox.
Does Allison make a 10 speed transmission?
With the introduction of the 2020 light truck line up’s a new Allison is now available for purchase, a 10 speed known as the 10L1000.
Has Ford fixed the 10 speed transmission problems?
Ford has offered a number of other fixes for the 10-speed such as an updated clip for the shift cable and even replacement of the first planetary gear in some models. So, the good news is it appears that Ford is finally taking the complaints seriously and actively trying to solve them.
Are Ford 10 speed transmissions reliable?
The Ford 10-speed transmission is not reliable. There have been numerous complaints from owners and lessees since its release in 2017, with some saying that their transmission problems began at just 10 miles.
Can you put an Allison transmission on a gas engine?
For over 60 years, Allison fully automatic transmissions have been recognized as reliable, productive and trouble-free. Allison Automatics are perfectly suited to natural gas engines, both compressed natural gas (CNG) and liquefied natural gas (LNG), in a wide range of applications.
Will a Allison Transmission bolt to a 6.0 Vortec?
According to GM, the Allison can safely do this at no more than 4850 RPM. I was told that if you reduce engine torque, the transmission can spin higher. So a Vortec 6000 or Vortec 8100 could spin the Allison 1000 higher than 4850 RPM since they both have much lower torque outputs.
Can you put an Allison Transmission in Ford?
No other pickup manufacturer can make the same claims! Putting an Allison Transmission in your Ford gives you a “Million Mile Solution”. To get a conversion kit for your truck, identify the Allison Transmission you plan on using, and select from the options above to build your CA Conversions Allison Conversion Kit.
Is the 10R80 a DCT?
Physically, the 10R80 and 10L80 transmissions are of equal size and weight (nominally) of a 6 speed automatic transmission. The 10R80/10L80 boasts extremely quick shifts, ousting the dual clutch transmission found in the Porsche PDK by a wide margin (26% to 36% quicker up-shifts in gears 1 through 4).
How much horsepower does a 2020 Ford Mustang 5.0 have?
What Features in the 2020 Ford Mustang Are Most Important? The base EcoBoost models come with a 310-hp, turbocharged 2.3-liter four-cylinder engine, and the GT gets a 460-hp, 5.0-liter V-8.
What is 10L80 transmission?
The 10L80 transmission is a 10-speed longitudinal automatic transmission that was designed to operate near the efficiency of a CVT while improving fuel economy in GM high-horsepower vehicles highlighted by the Camaro, Suburban, Tahoe, and Escalade. The 10L80 was a joint engineering effort between GM and Ford.
Who makes the 10L80 transmission?
GM 10L80 Hydra-Matic History
The GM 10L80 Hydra-Matic transmission is one such hybrid component that General Motors jointly developed with, wait for it, the Ford Motor Company! That’s right, you can find a variation of this Ford – GM 10-speed automatic transmission in the Ford Mustang GT and the Chevrolet Camaro ZL1!
Who makes the Ford 10-speed transmission?
General Motors and Ford Motor Company made the 10-speed transmission as a result of a collaboration between the duo. The agreement was for each company to design a unique version of the 10-speed transmission and a transverse 9-speed trans-axle, in their own factories.
Is the 10R80 a CVT?
Features Of The 10R80 Transmission
It was designed to compete with continuously variable transmissions (CVTs) on the market, and in order to do so, the 10R80 was manufactured to mimic the CVTs ability to deliver continuous power.
How many gears does a 6R80 have?
6R80 Transmission Features and Benefits
Offers six forward speeds, with gear ratios of 4.17, 2.34, 1.52, 1.14, 0.87, and 0.69:1. The US-produced Ford 6R80 transmission is based on the robust ZF 6HP26 design, which has been used by automakers world-wide for over 14 years.
How much is a 10R80 transmission?
Price is $1749 when sending in your 10r80 converter as a core, $1999 for a complete brand new units.
Which is better 68RFE or Aisin?
Pros of the 68RFE:
A final benefit to the 68RFE that may be relevant to some consumers is it’s fast shift speed compared to the Aisin. This is because the 68RFE does not necessitate as much of a fuel de-rate during shifts to facilitate a safe and properly timed clutch to clutch transition.
What is the strongest truck transmission?
Sun Coast calls this transmission package the OM3GA. It’s a Dodge 47RE/48RE-based four-speed automatic designed to handle obscene amounts of horsepower and torque. It can be tailored to a variety of applications, including Ford, Dodge, and Chevy diesel trucks.
Who makes Aisin?
Who makes Aisin transmissions? Aisin automatic transmissions are built by Aisin Seiki and Aisin AW. Toyota Motor Corporation and Aisin Seiki are shareholders of Aisin VW — the largest producer of automatic transmissions in the world.
Is the 7.3 gas a good engine?
7.3L Gas Godzilla Reliability
We expect the 7.3 godzilla to be a strong engine capable of surpassing the 300,000 mile mark and maintaining reliability under heavy towing.
Is there a Ford 6.2 diesel?
Ford 6.2, 7.3, &
6.7 Power Stroke Engines
The newest line-up of Ford Super Duty F-250 and F-350 trucks offer three main engine choices. Ford 6.2 and 7.3 gas engines may be a compelling choice for some – even over the highly capable 6.7 Power Stroke diesel.
How many turbos does a 2021 6.7 Powerstroke have?
2021 Ford 6.7L Powerstroke Specs
|TurboCharger:||Variable Geometry Turbocharger (VGT)|
|Valve Operation:||pushrod/rocker arms, 4 valves per cylinder|
|Transmission(s):||TorqShift 10R140 Automatic 10-Speed Transmission|
|Engine Oil Capacity:||13 Quarts or 12.4 Liters|