Quick Answer

Your Question How do I identify my Chrysler transmission?

How do I Identify Chrysler Transmissions?

  1. Determine if the transmission is an automatic or a manual, also known as a standard transmission.
  2. Go underneath the vehicle to access the transmission.
  3. Count the number of bolts and view the transmission pan shape on the automatic transmission.

How do I identify my Dodge transmission?

Open the hood of the truck and locate the transmission fluid container. The vehicle’s transmission information will be located on a plate adjacent to the container. Read the vehicle owner manual and you will be able to identify the vehicle’s transmission information.

What vehicles use the 46RE transmission?

46RH and 46RE

The 46RE can be found in a number of different rear wheel drive Chrysler products from 1995 through 2002, and some early-production 2003 Dodge Ram pickup trucks that had the 5.9L Magnum V8.

What is a A518 transmission?

The A518, which was later renamed the 46RE, was introduced by Dodge in 1990. It is a variant of the A727 and comes with overdrive added to it. The majority of vehicles that this transmission is used for include larger vans and trucks, such as the Durango and the Ram pickups.

How do you tell the difference between a 727 and 904 transmission?

Get down on your knees or whatever on the passenger side and look at the side of the trans. A 904 has a STRAIGHT sided pan, the 727 has a big bulge towards the front of the side of the pan.

What transmission does a 318 have?

The 904 was considered a light duty tranny. That’s why all the 318 automatic models received 904 transmissions. Smaller engine, lighter duty tranny.

Does VIN number tell your transmission?

Unfortunately, this is not required by the NHTSA VIN standard. Some OEMs still use the same 10-digit VIN patterns for automatic and manual transmission vehicles, meaning that VIN alone will not be enough to determine the vehicle’s transmission type.

How do I find my transmission by VIN number?

Simply write the VIN number down and you can then ask a dealership service department, auto repair shop, or auto parts retailer to help you identify the transmission. They’ll easily be able to find the specs by plugging the VIN number into the computer.

How do you identify an automatic transmission?

Automatic Transmissions

Some transmissions may have a code stamped into their case or a tag riveted to them. According to Koval, the easiest way to identify an automatic transmission, though, is by transmission pan shape. “Almost all have their own shape and pan bolt design,” Koval said.

How many gears does a 46RE have?

A 46RE transmission has a total of five gears. They are 1, 2, 3, 4, and Reverse.

What year did the 46RE come out?

The 46RE transmissions were first used on 1996 models and these units had computer-controlled shifting, whereas the first generation 46RH transmissions were hydraulically activated similar to the A-727.

Who made the 46RE transmission?

The 46RE transmission was produced by Chrysler’s automatic transmission division, TorqueFlite, and was originally named the A518 before it’s transition to the 46RH/ 46RE names. The A518 transmission was first manufactured in the late 1980s, being produced in the Dodge Ramcharger SUV from 1988 to 1993.

Is the A518 transmission the same as a 46RE?

A518 / 46RE Transmission Overview. The A518, later renamed to the 46RE or the 46RH depending on the model, featured prominently in Chrysler vehicles throughout the early 1990s. It was intended to replace the 727. The A518 has a similar layout to the A500, but more robust performance.

What vehicles had a A518 transmission?

A518 (46RH/46RE)

  • Dodge Ram pickup and vans 150/250/350 V8 and diesel engines (DGT)
  • Dodge Ramcharger SUV 1988-1993 5.2L & 5.9L V8.
  • Jeep Grand Cherokee 1993 5.2L, 1998 5.9L.
  • 1995 Dodge Dakota 5.2L Magnum V8.
  • 1996 Dodge Dakota V8.
  • 1998–2003 Dodge Dakota R/T.
  • 1998-2003 Dodge Durango 5.9L V8 (4WD or 2WD)

What year did the A518 transmission come out?

With the introduction of the A-518 Chrysler transmission in 1990, it’s possible to perform this conversion with many Mopar, 1972-’78 AMC and two-wheel drive Jeeps that were originally equipped with a Chrysler 727 transmission.

How much horsepower can a 904 transmission handle?

Fluid reaches 230-250-280 and the transmissions life will be measured in minutes/seconds. A more robust cooler than just the Engine Coolant Radiator is needed when power levels exceed 400 crank horsepower. A stock 904 could handle a MP Crate 360 no problem.

Are 727 transmissions any good?

The A-727 transmission is robust and highly adaptable in several applications which can be attributed to its widespread use in about 30 years. Its strength meant it could be used in Chrysler cars and non-Mopar applications such as work trucks as well as high-performance vehicles like sports cars.

How many gears does a 904 have?

The aluminum 904 was first introduced by the Chrysler Corporation in 1960, and is a design that evolved from the Chrysler PowerFlite, which was a two speed automatic, and then the cast-iron three-speed TorqueFlite which was durable but heavy.Price Tag.

$275.00
TCI Outlaw shifter $350.00
$225.00

How do I know what model transmission I have?

Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.

How do I tell if I have a CVT transmission?

The best way to identify a CVT transmission in your vehicle is to look for the manufactures logos indicating one, such as Toyota’s Synergy Drive, Honda’s Multi Matic and Nissan’s Xtronic.

How can I tell if I have a Allison Transmission?

The serial number of an Allison transmission usually contains 10 numbers, and is listed just under the model number of the transmission. The data plate of an Allison transmission contains lots of information. However, the serial number is typically shown on the bottom left of the transmission data plate.

What does the 9th digit in a vin mean?

Number 9 is the check digit, which is used to detect invalid VINs. The number that appears varies and is based on a mathematical formula that the U.S. Department of Transportation developed.

What transmission does a 5.3 Vortec have?

In all applications, the engine is matched with GM’s Hydra-Matic 6L80 six-speed automatic transmission. The 5.3L’s balance of performance and efficiency is great airflow throughout.

How can I tell if I have a 4L60 or 4L60E?

The rear output housing is configured with a six-bolt pattern in late model 4L60E transmissions. The 4L60 transmission is configured with a four-bolt pattern. The bolt pattern is not a guaranteed distinction, however, as early 4L60E transmissions, manufactured from 1992 through 1997, also have a four-bolt pattern.

How do I know if I have a 200 4R transmission?

You can find a donor TH-200-4R in one of these cars: The transmission identification is on a plate on the right side of the case towards the tailshaft. This ID plate is attached by one rivet. The plate will have a two- or three-letter transmission code in large letters.

How can you tell the difference between a Turbo 350 and 400?

The TH-350 uses a square pan, with one corner cut off. The TH-400 uses an oblong-shaped pan with one side having a “hump” in the pan and one side is curved while the other two sides are straight. The TH-400 pan also has two circular indentations on the humped side of the pan.