Quick Answer

Your Question How much does it cost for a solid axle swap?

The process generally costs around $2500-$3000, depending on how involved the engineer needs to be throughout. However, it’s a vital component to ensure the vehicle is legal and safely built.

What are the strongest Toyota axles?

RCV Ultimate 30 Spline Axle Set with 300M Inner Axle for Toyota Pickup and 4Runner – STRONGEST – 300M INNER AXLE AND STAR. These are the strongest axles you can buy, with 300M inners and a 300M star. These are the strongest Birfield axleshafts you can get for your Toyota pickup or 4Runner.

Is Dana 60 a ton?

The Dana 60 and Dana 70 are two heavy-duty variants in the Dana axle line, and are typically found in 3/4 ton and 1 ton pickup trucks.

Is it hard to do an axle swap?

Now, a solid axle swap is not exactly an easy feat. But for those with the right skill set or will to learn, it’s definitely doable. Despite the old Toyota IFS being a great system, it lacks wheel travel and articulation. That’s why this serious off-roader opted for a solid axle swap.

What does SAS mean trucks?

As a cost reduction partner, Toyota’s unique system of active stability, or SAS, focuses entirely on making operators more productive while protecting the operator, the forklift, the materials handled, and the facility.

Why is solid axle better than ifs?

A solid axle has less moving parts and is easier to service, with no crossmembers clogging everything up. I also don’t like that the centersection in many new IFS rigs is made of aluminum. Solid-axle centersections are typically cast iron, which is more durable.

What axles are in a 85 Toyota pickup?

Toyota used a solid front axle in the ’79-’85 pickups and 4Runners. All of these axles were 55.5 inches wide from wheel mounting surface (WMS) to wheel mounting surface and came with solid front disc brakes and closed knuckles with Birfields.

Is a Dana 44 good?

At the same time, the Dana 44 is a great axle if you don’t need giant tires or big power. Most people don’t realize how heavy a Dana 60 is and how much unsprung weight affects handling. The Dana 44 is also a heavy axle, but it’s significantly lighter than a Dana 60.

Is a Dana 44 strong?

Dana 44’s are fairly strong, guys seem to like em for 4×4’s. They hold up to a fair bit of bashing and big tires. I think they’re comparable to a 9″ in strength. By the way, a ’90’s explorer had an 8.8″ not a dana.

What’s the difference between a Dana 44 and a Dana 60?

The Dana 44 differential cover will measure about 9 1/2 inches wide and 10 1/2 inches tall, while the Dana 60 differential cover will measure about 11 1/4 inches wide and 12 inches tall. Beware: The Dana 70 differential cover measures the same as the Dana 60 cover.

What did a Dana 70 come in?

The Dana 70 rear axle was first used in the Dodge W300 in 1958. The Dana 70 started out using 10 spline pinions and 23 spline axle shafts. The later, more current, Dana 70 axles use 29 spline pinions and 32 or 35 spline axle shafts.

How much torque can a Dana 60 handle?

Both versions have a torque output rating of 5,500 lb-ft. The Dana 60’s ring gear is 9.75 inches in diameter, and the available gear spread ranges from 3.31:1 to 7.17:1.

What is the point of a solid axle swap?

Solid axle swap allows you to move your wheel location to allow larger tires. You can’t easily move the firewall, but you can usually push the axle forwards, clearance the guards and fit bigger tires.

What are the advantages of a solid axle?

“A solid axle setup can improve traction over big bumps and hills as well as gain more torque from the differential as there are fewer parts that power must transfer through,” says aftermarket manufacturer Fab Fours in a comparison between both systems.

How do you do a rear end swap?

How To Do A Rear Axle Swap – RA24 Toyota Celica Project

What is a SAS Toyota?

TOYOTA’s exclusive System of Active Stability (SAS) Unique to Toyota forklift trucks, System of Active Stability (SAS) is a patented dynamic system, which constantly monitors forklift operations and automatically takes corrective action when it senses factors that could lead to truck or load instability.

What is SAS in a car?

That’s why we put together this overview of a car steering and suspension (SAS) system.

What is SAS light?

SAS Go Light is a supplementary low-cost offering, aimed at people who want to travel without checking in luggage.

Can you rock crawl with ifs?

Sure, an IFS rig can be built to work in the big rocks, but cost and simplicity tend to keep the solid axle alive when it comes to rockcrawling.

Who is IFS officer in India?

The Indian Foreign Service (IFS) is the diplomatic arm of the Government of India under Group ‘A’ Central Civil Services.Indian Foreign Service.

Service Chief
Foreign Secretary Harsh Vardhan Shringla, IFS
Minister of the Service
Minister of External Affairs Subrahmanyam Jaishankar, MP

What is IFS suspension?

Most modern vehicles have independent front suspension (IFS). Many vehicles also have an independent rear suspension (IRS). IRS, as the name implies, has the rear wheels independently sprung. A fully independent suspension has an independent suspension on all wheels.

What axles are in FJ80?

US model FJ80 all 91-92, and some 93-94 use c/clip semi float axles. 93-97 FZJ80 with disc brakes are full float, and also have optional factory Electric locker. All us models come with 4.10 ratio.

Can Dana 44 Handle 37 tires?

No problem at all! Get a Dana 44 front, some upgraded axle shafts, and you should be able to handle the 37s fine, as long as you don’t drive it like a complete moron, in which case you can break just about any axle!

How big of a tire can a Dana 44 handle?

However, as a very general rule, a 36-inch tire is about the limit for a Dana 44.

Can a Dana 44 Handle 35 inch tires?

But the general consensus is that yes, 35’s are the limit for D44’s in stock form. Especially in the rear. A front D44 can be built and strengthened to handle much bigger tires, but the rear gets limited real quick. You can upgrade shafts and such, but with bigger tires comes lower gears, which come smaller pinions.

Can you run 40s on a Dana 44?

For a daily driver or a non wheeling rig, 44 and 40’s are fine.

How many splines does a Dana 35 have?

Your stock Dana 35 has 27 spline carbon steel axle shafts, you could upgrade it to 30 spline hardened chromoly steel shafts and install a locker with a “Super 35” kit.

Is Dana 60 full float?

Dana 60 rear axle

Manufactured in both full float and semi float variations. The semi float axles have GAWR up to 5,500 lbs and the full float axles were rated up to 6,500 lbs. Full floating variants are common while Semi-floating axles exist, but are less common.