Quick Answer

Your Question How much power can you get out of a 12 valve?

Adding a P7100 to the first generation 12-valve engine effectively takes the truck’s horsepower capability from 350 rwhp to 600 rwhp. For those kinds of gains it’s definitely worth the hassle of hunting down all the conversion parts you need.

What does P-pump stand for?

One of this engine’s features that makes it so desirable is the Bosch P7100 inline mechanical injection pump. This injection pump, often called a “P-pump,” is the Holley Four-barrel carburetor of the diesel world.

How much fuel pressure does a Ppump require?

Required fuel pressure can vary depending on your vehicle’s engine and fuel system. Carbureted engines may require as little as 28 kPa (4 PSI), while modern multipoint fuel injected high-performance engines can require as much as 414 kPa (60 PSI).

How much HP does AP pump add?

Air Fuel Control

And when combined with a star wheel adjustment (located within the AFC housing), as much as 200 lb-ft of torque can be added, along with a peak horsepower increase of 50 to 60 horsepower.

Why is the 12v Cummins so good?

What made the Cummins so popular was the fact that its peak power and torque was insanely usable—in fact, the redline is only at 3,000 RPM! The 12-valve was able to get respectable fuel economy while producing torque figures never-before seen in an ordinary pickup truck.

How much HP can a HX35 support?

HX35 is good to around 300-400 hp, i turned mine in to a hybrid and it still is not enough.

What years did Cummins use the P-pump?

Believe it or not, the P-pump was introduced so the 5.9L could meet 1994 emission standards set to take effect on January 1, 1994. The higher injection pressures produced by the P7100 were used to cut down on particulate matter produced in-cylinder (and exiting out the tailpipe).

What years were Cummins P-pump?

1994-1998 12V Cummins (12 Valve) Features

The first variation of the second gen cummins features the desirable “p-pump” fuel injection pump. New injectors, a larger intercooler, and a new turbocharger were also introduced. These additions help reduce emissions output compared to the previous generation.

Can you p-pump a 7.3 Powerstroke?

Everyone loves a P-pumped 7.3L Power Stroke. They lope, they smoke, they make big power and they always rally the Ford fan base.

How many Lph do you need for 500hp?

190 lph

Fuel Pump Free Flow Carbureted Engine Fuel Injected Engine
40 gph/155 lph 450 hp 400 hp
50 gph/190 lph 600 hp 500 hp
67 gph/255 lph 750 hp 650 hp
90 gph/340 lph 1000 hp 850 hp

Can you have too much fuel pump?

Using the wrong fuel pump that delivers excess pressure can cause problems ranging from poor performance and lower gas mileage to flooding and carburetor damage. When the pressure is only a little over the required amount, your vehicle may sputter when you first accelerate from a stopped position.

What happens if a carburetor has too much fuel pressure?

The symptom of too much fuel pressure is that the bowls over flow. The pressure is too high and it pushes the needle off the seat, pushing the float down into the fuel. You will see fuel over flowing from the carb coming out of the vents. The engine will stall or catch on fire if your luck runs out.

How much is a 12 valve Cummins engine worth?

A shop skilled in Cummins swaps will charge around $12,000 to $15,000 to take a 12-valve version with the 5R110.

Is 24V better than 12v Cummins?

In summary, those looking to keep things stock or modest the 24v is the better street engine. If you’re looking for extreme power and performance the older 12v Cummins engine is likely the better choice.

What P-pump is best?

The general consensus is the 180 hp pump is the best of the P-Pumps for high hp goals. The 160 and 175hp pumps can not move as much fuel as easily as the 180 or 215 pumps. When you start looking at school bus and other applications of injection pumps knowledge goes downhill on what to do with them for upgrades.

What year 12v Cummins is best?

Among its strong suits are

  • P7100 (The Holy Grail) While the 12-valve was built from 1989 to 1998, most people look for the 1994-98 model.
  • Affordable Injector Upgrades.
  • Simple Designs.
  • HX35:
  • Free Horsepower.

How much HP does a 12 valve Cummins have?

5.9L Cummins 12v (6BT) Engine Specs

Engine: Cummins 6BT (commonly referred to as the “12 valve Cummins”)
Horsepower: 160 – 215 HP @ 2,500 RPM
Torque: 400 – 440 lb-ft @ 1,600 RPM
Governed Speed: ~ 2,700 RPM
Engine Weight: ~ 1,100 lbs, dry & dressed (~ 890 lbs dry, engine assembly only)

How much HP does a 7.3 diesel have?

7.3L Power Stroke Specs

Engine: 7.3L Power Stroke diesel V-8
Peak Horsepower: • 210 hp @ 3,000 rpm (intro horsepower rating, 1994 MY) • 275 hp @ 2,800 rpm (peak horsepower rating, 2003 MY)
Peak Torque: • 425 lb-ft @ 2,000 rpm (intro torque rating, 1994 MY) • 525 lb-ft @ 1,600 rpm (peak torque rating, 2003 MY)

How many MM is a HX35 Turbo?

Holset HX35 Turbochargers

Holset HX35 Turbocharger Specs
DIMENSIONS:
Length (mm) 224
Width (mm) 250
Height (mm) 169

How much boost does a HX35 make stock?

“The HX-35 and HY-35 turbochargers are rated for a maximum boost of 44 PSI.

How much HP can a hx40 support?

Registered. about 450, anything more and egts would be outta the safe range.

How much horsepower does a first gen Cummins have?

160 horsepower @ 2,500 rpm

1st Gen 5.9L Cummins Years: 1989-1993
Fuel: Diesel
Governed Speed: 2,500 RPM
Horsepower 160 horsepower @ 2,500 rpm
Torque 400 lb-ft @ 1700 rpm

How much is a 1st Gen Cummins worth?

avg price around here is 3500-5500. thats for a decent first gen that needs some work, like exterior or interior.

How much horsepower does a 5.9 Cummins have?

By 2007, the 5.9 Cummins offers an impressive 325 horsepower and 610 lb-ft. A large part of the power improvements were due to the 4-valve per cylinder design and electronic engine management. *12v 5.9 Cummins are also known as the 6BT while 24v diesel engines are the ISB 5.9.

How much HP does a 6.7 Cummins have?

370 HP

Diesel Engine Key Specs
6.7L Cummins® turbo-diesel 370 HP 850 lb.-ft. torque Corporate 68RFE 6-speed automatic transmission 4×2 or 4×4 drive system 21,560 lbs. max. towing 5,730 lbs. max. payload

Are 2nd Gen Cummins reliable?

These trucks had big shoes to fill because of how successful and durable the first generation Cummins was. Thankfully, despite becoming slightly more sophisticated, these trucks are also very reliable. Much of your truck’s reliability, however, is dependent on you being an expert on 2nd Gen Cummins Maintenance.

Are 24v Cummins reliable?

Cummins 5.9 24v Reliability

Outside of the fuel system, the 5.9 24v is a very reliable engine. The engine internals such as the pistons, rod, and crankshaft will last a lifetime and can hold up beyond 500,000 miles.

How much HP can a 7.3 handle?

The 7.3 Powerstroke is a two-valve behemoth which measures in at 444 cubic inches and has a maximum stock power rating of 275hp and 525lb.

How can I get more horsepower out of my 7.3 Powerstroke?

600-800 HP

  1. 300cc to 400cc injectors with 200 or 400 percent larger nozzles.
  2. Custom tuning via TS Performance six-position chip or Hydra chip.
  3. 75mm or larger S400-based BorgWarner or Garrett turbo.
  4. Electric fuel system.
  5. Regulated return fuel system.
  6. Ported heads with matching cam (preferred but not a necessity)

How much horsepower does a 1999 7.3 Powerstroke have?

235 horsepower

Years It Was Used: 1994.5-2003
Fuel Tank Size: 29 Gallons – Short Box 38 Gallons – Long Box
Horsepower (Varies): 1994-1995 : 210 horsepower 1996 : 215 horsepower 1997-1998: 225 horsepower 1999-2000 : 235 horsepower 2001-2003 Auto Trans. : 250 horsepower 2001-2003 Manual Trans. : 275 horsepower